Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for TOORX Chrono SRX EVOLVE
Summary of Contents for TOORX Chrono SRX EVOLVE
- Page 1 INSTRUCTION iConsole App Manual www.toorx.it/iconsole...
-
Page 2: Exploded Drawing
EXPLODED DRAWING... -
Page 3: Part List
PART LIST Part # Description Quantity Computer Screw Knob Handlebar Handlebar post Emergency brake Hex nut Braking bolt End cap Tube spacer Spring Screw Bushing Seat post End cap Slipping tube fixed nut Slipping tube L shape knob Saddle Screw Plastic cover Iron sheet Washer... - Page 4 Sensor cable Sensor Pedal left Pedal right Crank end cap Flange nut Crank left Crank right Round cover Tube Bearing Screw DC cable DC cable cover Rear end cap Adjusting pad Rear stabilizer bar Main frame Screw Screw Chain cover left Washer Washer Belt wheel...
- Page 5 Magnet set Magnet set axle Break pad Washer Spring washer Hex screw Front stabilizer bar Washer Bushing Wheel Plastic tube Allen bolt Spring washer Curved washer Spring Screw Screw Motor Lower compuer cable Knob Upper computer cable End cap End cap Screw Screw Front plastic cover left...
-
Page 6: Assembly Instruction
ASSEMBLY INSTRUCTION STEP 1 A. Attach the Front Stabilizer bar(76) onto the Main frame(50) with 2 Allen bolt(82), 2 Spring washer(83) and 2 Curved washer(84), Tighten fully. B. Attach the Rear Stabilizer bar(48) onto the Main frame(50) with 2 Allen bolt(82), 2 Spring washer(83) and 2 Curved washer(84), Tighten fully. - Page 7 STEP 2 A. Attach Left pedal(36L)&Right pedal(36R) Left crank(39L)&Right crank(39R), tightening it clockwise.
- Page 8 STEP 3 A. Attach the Saddle(20) to the Saddle post(18). Tighten fully as picture the small image shows. B. Insert the Saddle post(15) into the Main frame(50), position it correctly and tighten the Knob(92).
- Page 9 STEP 4 A. Loosen the Knob(92), then insert the Handlebar post(5) into the Main frame(50). Position it correctly and tighten the Knob(92). B. Attach the Upper tension cable(93)&Lower computer cable(91) as the small image shows. Then insert the End cap(94) into the Handlebar post(5). C.
- Page 10 STEP 5 A. Attach the computer(1) on the Handlebar(4) with 4 Screw(2). Insert the Upper computer cable(93) into the Computer(1).
-
Page 11: Computer Instruction
COMPUTER INSTRUCTION DISPLAY FUNCTIONS ITEM DESCRIPTION TIME Workout time displayed during exercise. Range 0:00 ~ 99:00 SPEED Workout speed displayed during exercise. Range 0.0 ~ 990 Workout distance displayed during exercise. Range 0.0 ~ 99.00 DISTANCE Burned calories during workout display. Range 0 ~ 9990 CALORIES Pulse bpm displayed during exercise. - Page 12 OPERATION PROCEDURE 1. POWER ON When POWER ON or hold RESET key for 2s, buzzer will sound 1s and LCD full display for 2 seconds (Picture1). Then display wheel diameter and unit (Picture2). Then go to Standby mode. After 4 minutes without pedaling or pulse input, console will enter into power saving mode. Press any key may wake the console up.
- Page 13 4. Beginner Mode Press UP or DOWN to select Beginner mode and press MODE to confirm. Press UP or DOWN to select Beginner 1~4 (Picture 7) and press MODE to confirm. Press UP or DOWN to set TIME and press START/STOP key to start workout. Then press UP or DOWN to adjust resistance level.
- Page 14 7. Cardio Mode Press UP or DOWN to select Cardio mode and press MODE to get into (Picture 10). Press UP or Down to set AGE, then select 55%.75%.90% or TAG (TARGET H.R) and press MODE to confirm. Press UP or DOWN to preset workout TIME. Press START/STOP key to start or stop workout.
- Page 15 GARLANDO SPA Via Regione Piemonte, 32 - Zona Industriale D1 15068 - Pozzolo Formigaro (AL) - Italy www.toorx.it - info@toorx.it...
Need help?
Do you have a question about the Chrono SRX EVOLVE and is the answer not in the manual?
Questions and answers