Amazone SL 3000 Original Operating Manual
  1. Manuals
  2. Brands
  3. Amazone Manuals
  4. Farm Equipment
  5. SL 3000
  6. Original operating manual
Amazone SL 3000 Original Operating Manual

Amazone SL 3000 Original Operating Manual

Mounted wheel mark eradicator
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Original operating manual
Mounted wheel mark eradicator
SL 3000
SmartLearning
www.amazone.de

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SL 3000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Amazone SL 3000

Summary of Contents for Amazone SL 3000

  • Page 1 Original operating manual Mounted wheel mark eradicator SL 3000 SmartLearning www.amazone.de...
  • Page 2 Please enter the identification data of the implement. The identification data can be found on the rating plate.

  • Page 3: Table Of Contents

    Layout of the warning symbols eradicator coulter 4.4.3 Description of the warning symbols 6.3.3 Enlarging the working width Rating plate on the implement 6.3.4 Adjusting the wheel mark eradicator to the track width MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 4 Maintenance schedule 10.2.2 Checking the wheel mark eradicator coulter 10.3 Cleaning the implement 11 Loading the implement 11.1 Loading the implement with a crane 11.2 Lashing the implement 12 Disposing of the implement MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...

  • Page 5: About This Operating Manual

    WARNING Indicates a possible threat with moderate risk for severe physical injury or death. CAUTION Indicates a threat with low risk for light or moderately severe physical injuries. MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...

  • Page 6: Further Instructions

    Example: 1. Instruction 1 2. Instruction 2 1.2.3.2 Instructions and responses CMS-T-005678-B.1 Reactions to instructions are marked with an arrow. Example: 1. Instruction 1 Reaction to instruction 1 2. Instruction 2 MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 7 CMS-T-00013932-B.1 WORKSHOP WORK Identifies maintenance work that must be performed at a workshop that is adequately equipped in terms of agricultural technology, safety and environmental technology by specialist personnel with appropriate training. MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...

  • Page 8: Lists

    A list of other applicable documents can be found in the Appendix. 1.4 Digital operating manual CMS-T-00002024-B.1 The digital operating manual and e-learning can be downloaded from the Info Portal on the AMAZONE website. 1.5 Your opinion is important CMS-T-000059-D.1 AMAZONEN-WERKE H. Dreyer &...

  • Page 9: Safety And Responsibility

    2.1.2.1.1 Requirements for persons working with the implement CMS-T-00002310-B.1 If the implement is used improperly, people can be injured or killed: To prevent accidents due to improper use, every person who works with MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 10 Farmers are basically familiar with working with agricultural implements and can instruct agricultural helpers in how to use the implements if necessary. They can perform odd tasks and simple maintenance and repair work on agricultural implements themselves. MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 11 Passengers can fall, be run over and severely injured or killed due to machine movements. Ejected objects can hit and injure passengers. Do not let anybody ride on the machine. Do not let anybody climb onto the driving machine. MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 12 Non-observance of the technical limits values of the machine can result in accidents and serious personal injury or even death. Moreover, the machine can be damaged. The technical limit values can be found in the Technical Data. Comply with the technical limit values. MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 13 Missing warning symbols increase the risk of serious and lethal personal injury. Clean dirty warning symbols. Immediately replace any damaged and illegible warning symbols. Put the intended warning symbols on spare parts. MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...

  • Page 14: Knowing And Preventing Dangers

    If the universal joint shaft is angled down too strongly: Switch off the universal joint shaft drive. If you do not need the universal joint shaft: Switch off the universal joint shaft drive. MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 15 When the drives are switched off, machine parts can continue running and cause serious personal injury or death. Before approaching the machine, wait until any machine parts that are still running have come to a stop. Only touch machine parts that are standing still. MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 16 If people enter the danger area, immediately switch off the engines and drives. CMS-I-00010881 Before you work in the danger area of the implement, secure the tractor and implement. This also applies for quick checking work. MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...

  • Page 17: Safe Operation And Handling Of The Machine

    Use only suitable tractors for coupling and transporting the implement. When the implement is coupled onto the tractor, make sure that the tractor's connecting device meets the implement requirements. Couple the implement properly to the tractor. MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 18 If the machine is not properly prepared for road travel, it can result in serious traffic accidents. Check the lighting and identification for road travel for proper function. Remove coarse dirt from the implement. Follow the instructions in the section "Preparing the implement for road travel". MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...

  • Page 19: Safe Maintenance And Modification

    To ensure that the operating permit remains valid in accordance with national and international regulations, ensure that the specialist workshop only uses conversion parts, spare parts and special equipment approved by AMAZONE. MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 20 Particularly on slopes, additionally secure the machine against rolling away with wheel chocks. Remove the ignition key and carry it with you. Wait until all parts that are still running come to a stop and that hot parts cool down. MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 21 Never modify safety-related components. Never drill out existing holes. Perform all maintenance work at the prescribed maintenance intervals. MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 22 2.1.5.3 Operating materials CMS-T-00002324-C.1 Unsuitable operating materials Operating materials that do not meet AMAZONE requirements can cause implement damage and accidents. Only use operating material that meet the requirements in the Technical Data. MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...

  • Page 23: Safety Routines

    CMS-T-00002325-B.1 Special equipment, accessories, and spare parts Special equipment, accessories, and spare parts that do not meet AMAZONE requirements can impede the operational safety of the implement and cause accidents. Only use original parts or parts that meet AMAZONE requirements.
  • Page 24 2 hands and one foot or 2 feet and one hand on the implement. When climbing up and down, never hold onto the control elements. When climbing down, never jump off of the implement. MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...

  • Page 25: Intended Use

    AMAZONE. Uses other than those specified under the intended use are considered as improper. The manufacturer is not liable for any damage resulting from improper use, solely the operator is responsible. MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...

  • Page 26: Product Description

    4 | Product description Product description CMS-T-00014990-A.1 4.1 Implement overview CMS-T-00015041-A.1 Wheel mark eradicator coulter Hose cabinet Parking supports CMS-I-00009761 Threaded cartridge Lower link catch hook CMS-I-00009762 MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...

  • Page 27: Function Of The Implement

    The parking supports 1 are only used to park the wheel mark eradicator. CMS-I-00008352 4.3 Special equipment CMS-T-00015825-A.1 Narrow coulter Heart-shaped coulter Wing coulter LED lights Hydraulic kit for wheel mark eradicator SL MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...

  • Page 28: Warning Symbols

    A warning symbol consists of two fields: Field 1 shows the following: A pictogram depicting the danger area, CMS-I-00000416 surrounded by triangular safety symbol The order number Field 2 shows a pictogram depicting how to avoid the danger. MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...

  • Page 29: Description Of The Warning Symbols

    Never look for leaks in hydraulic hose lines using your hand or fingers. Never attempt to plug leaks in hydraulic hose lines using your hand or fingers. If you are injured by hydraulic oil, consult a doctor immediately. CMS-I-000216 MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 30 Before you actuate the tractor hydraulic system, instruct persons away from the area between the tractor and the implement. Actuate the tractor hydraulic system only from the designated work station. CMS-I-000139 MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...

  • Page 31: Rating Plate On The Implement

    4.6.1 Rear lighting and identification for road travel CMS-T-00001498-F.1 Warning signs Reflector, red Rear lights, brake lights, and turn indicators Reflector, yellow CMS-I-00004545 NOTE The lighting and identification for road travel can vary depending on the national regulations. MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...

  • Page 32: Additional License Plate

    4 | Product description Threaded cartridge 4.6.2 Additional license plate CMS-T-00003999-C.1 Licence plate lighting Licence plate holder CMS-I-00003163 4.7 Threaded cartridge CMS-T-00001776-E.1 The threaded cartridge contains the following items: Documents Aids CMS-I-00002306 MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...

  • Page 33: Technical Data

    Wheel mark eradicator coulter Maximum working depth 150 mm 5.3 Permitted mounting categories CMS-T-00008867-B.1 Lower link mounting Category 3, Category 4N 5.4 Forward speed CMS-T-00015048-A.1 Recommended working speed 10 km/h to 16 km/h MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...

  • Page 34: Drivable Slope Inclination

    On right in direction of travel Up the slope and down the slope Up the slope Down the slope 5.6 Lubricants CMS-T-00002396-B.1 Manufacturer Lubricant ARAL Aralub HL2 FINA Marson L2 ESSO Beacon 2 SHELL Retinax A MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...

  • Page 35: Preparing The Implement

    Rear axle load of the operational tractor without mounted implement or ballast weights Total weight of front-mounted implement or front ballast Total weight of the rear-mounted implement or rear ballast MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 36 3. Calculate the actual total weight of the tractor- G = G + T + G +F implement combination. G = G + T + G +F G = G + T + G +F CMS-I-00006276 MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 37 Tyre load according to according to capacity for two tractor operating calculation tractor tyres manual ≤ Minimum front ballast weight ≤ Total weight ≤ ≤ Front axle load ≤ ≤ Rear axle load MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...

  • Page 38: Coupling The Implement

    Spacer discs Category 3 t=6.5 mm Category 4N Without spacer disc 1. Determine the spacer discs according to the catch hooks on the tractor. 2. Install the ball sleeves and spacer discs. MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...

  • Page 39: Attaching The Ball Sleeve For The Top Link

    Slightly lift the wheel mark eradicator using the three-point power lift. 2. Pull the pins 1 for the two parking supports out of the holes. 3. Store the parking supports in a suitable place. CMS-I-00006353 MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...

  • Page 40: Coupling The Hydraulic Hose Lines

    Risk of injury or even death If the hydraulic hose lines are incorrectly connected, the hydraulic functions may be faulty. When coupling the hydraulic hose lines, observe the coloured markings on the hydraulic plugs. MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...

  • Page 41: Preparing The Implement For Operation

    If a seed drill is attached to the mounted wheel mark eradicator, the coupling point of the tractor must be shifted to the rear by 574 mm. To adjust the geometry of the tractor: Refer to the "Tractor" operating manual. MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...

  • Page 42: Changing The Wheel Mark Eradicator Coulter

    2 on the tool carrier. 4. Install the bolts. 5. Install the nuts and tighten them. To check the setting, drive for 30 m at working speed and then check the work pattern. MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...

  • Page 43: Enlarging The Working Width

    6. Move the wheel mark eradicator bracket 1 to the desired lateral position. 7. Tighten the nuts. To check the setting: drive for 30 m at working speed and then check the work pattern. CMS-I-00008363 MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...

  • Page 44: Adjusting The Wheel Mark Eradicator To The Track Width

    6. Secure the wheel mark eradicator with the locking pin. 7. Secure the locking pin with the linch pin. To check the setting: drive for 30 m at working speed and then check the work pattern. MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 45 4. Using the recessed grip, move the wheel mark eradicator into the topmost position. 5. Secure the wheel mark eradicator with the locking pin. 6. Secure the locking pin with the linch pin. MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 46 To prevent lateral loads when driving in curves, lift the soil tillage tools before driving into the headlands. When the direction of the implement matches that of the direction of travel, lower the soil tillage tools. MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 47 8 | Eliminating faults Eliminating faults CMS-T-00015011-A.1 Errors Cause Solution The tension spring of the wheel To install and remove the mark eradicator is broken. tension springs, contact your dealer. MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 48 1. Slide the pins 2 for the two parking supports into the holes 1 up to the stop. 2. Lower the implement onto the parking supports using the lower link. CMS-I-00008502 MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 49 1. Secure the tractor and implement. 2. Put the control lever on the tractor control unit in float position. 3. Disconnect the hydraulic hose lines 1 . 4. Put the dust caps on the hydraulic sockets. CMS-I-00001065 MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 50 9 | Parking the implement Disconnecting the hydraulic hose lines 5. Hang the hydraulic hose lines 1 in the hose cabinet. CMS-I-00001250 MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 51 Only grease the implement with the lubricants listed in the technical data. CMS-I-00002270 Press the dirty grease completely out of the bearings. MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 52 10 | Repairing the implement Lubricating the implement 10.1.1 Overview of lubrication points CMS-T-00015091-A.1 CMS-I-00009784 Every 10 operating hours CMS-I-00009785 MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 53 CMS-I-00001081 the tool carrier is less than 15 mm, replace the wheel mark eradicator coulter 2 . To replace the wheel mark eradicator coulter, see page 38. MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 54 Always maintain a minimum distance of 30 cm between the high-pressure nozzle and the implement. Do not exceed a water pressure of 120 bar. Clean the machine with a high-pressure cleaner or a hot water high-pressure cleaner. MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 55 11 | Loading the implement Loading the implement CMS-T-00016256-A.1 11.1 Loading the implement with a crane CMS-T-00016258-A.1 CMS-I-00010806 The implement has a lashing point for slings for lifting. MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 56 Only attach the slings for lifting at the marked lashing points. 1. Attach the slings for lifting on the intended lashing point. 2. Slowly lift the implement. 11.2 Lashing the implement CMS-T-00016259-A.1 CMS-I-00010810 MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 57 1. Put the implement on the transport vehicle. 2. Attach the lashing straps at the marked points. 3. Lash down the implement in compliance with the national regulations for load securing. MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 58 2. Return batteries to the distributor Dispose of batteries at a collection point. 3. Put recyclable materials in the recycling. 4. Treat operating materials like hazardous waste. WORKSHOP WORK 5. Dispose of the coolant. MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 59 380 Nm 290 Nm 405 Nm 485 Nm 27 mm M18x1.5 325 Nm 460 Nm 550 Nm 410 Nm 580 Nm 690 Nm 30 mm M20x1.5 460 Nm 640 Nm 770 Nm MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 60 20.4 Nm 342 Nm 40.7 Nm 470 Nm 70.5 Nm 589 Nm 13.2 Other applicable documents CMS-T-00003776-B.1 Tractor operating manual Soil tillage implement operating manual ISOBUS software operating manual Control terminal operating manual MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 61 Tractor In this operating manual, the designation tractor is always used, even for other agricultural tractor units. Implements are mounted on the tractor or towed by the tractor. MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 62 Parking the machine Moving the wheel mark eradicator into parking position Geometry Product description defining Additional license plate Headlands Rating plate turning on the headlands Description Hose cabinet removing Position Parking supports MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 63 Description Layout Position Wheel mark eradicator Adjusting the track width Changing the coulter Checking the coulter spring-suspended, adjusting the working depth 40 Wheel mark eradicator coulter Position Working width enlarging Workshop work MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...
  • Page 66 AMAZONEN-WERKE H. DREYER SE & Co. KG Postfach 51 49202 Hasbergen-Gaste Germany +49 (0) 5405 501-0 amazone@amazone.de www.amazone.de MG7800-EN-GB | A.1 | 22.05.2024 | © AMAZONE...

Table of Contents