Basic Notes - Megger digiPHONE+2 User Manual

Basic notes

1
Safety precautions
Labelling of safety
instructions
Working with products
from Megger
Operating staff
Basic notes
This manual contains basic instructions for the initial use and operation of the device. For
this reason, it is important to ensure that the manual is always available to authorised and
trained operating personnel. Operating personnel should read the manual thoroughly. The
manufacturer will not be held liable for any injury or damage to personnel or property
through failure to observe the safety precautions contained in this manual.
The specific standards and regulations in each country must also be observed!
The following signal words and symbols are used in this manual and on the product itself:
Signal word / Description
symbol
DANGER Indicates a potential hazard which will result in death or serious
injury if not avoided.
WARNING Indicates a potential hazard which may result in death or
serious injury if not avoided.
CAUTION Indicates a potential hazard which may result in moderate or
minor injury if not avoided.
NOTICE Indicates a potential hazard which may result in material
damage if not avoided.
Serves to highlight warnings and safety instructions.
As a warning label on the product it is used to draw attention to
potential hazards which have to be avoided by reading the
manual.
Serves to highlight warnings and safety instructions that
explicitly indicate the risk of an electric shock.
Serves to highlight important information and useful tips on the
operation of the device/system. Failure to observe may lead to
unusable measurement results.
It is important to observe the generally applicable electrical regulations of the country in
which the device will be installed and operated, as well as the current national accident
prevention regulations and internal company directives (work, operating and safety
regulations).
Use genuine accessories to ensure system safety and reliable operation. The use of other
parts is not permitted and invalidates the warranty.
This system and its peripheral equipment may only be operated by trained or instructed
operating personnel. Anyone else must be kept away.
The system may only be installed by a specialist electrician. DIN VDE 0104 (EN 50191),
DIN VDE 0105 (EN 50110) and the German accident prevention regulations (UVV) define
a specialist electrician as someone whose knowledge, experience and familiarity with the
applicable regulations enables him to recognise potential hazards.
7