Megger digiPHONE+2 User Manual page 89

Pairing with Bluetooth accessories
Establishing a
Bluetooth connection to
a known device
If the headset or GPS receiver is switched on and the internal Bluetooth module is active,
the connection to a known Bluetooth device is normally established automatically within
a few seconds after the display unit is switched on.
If this does not work or if the display unit is connected to the wrong device, proceed as
follows:
Step Action
1 Ensure the Bluetooth device is switched on.
2
Activate the Bluetooth module of the display unit via menu item
3
Use menu item
Result: The list of known devices is displayed. If one of the devices is
currently connected to the display unit, it is highlighted in green.
4 Use the rotary knob to find the correct device based on the identifier and
press the rotary knob to establish a connection.
Result: The display unit switches to the measurement screen and attempts to
connect to the selected device. This is indicated by the flashing
After successful pairing, the existing Bluetooth connection is indicated in the
measurement screen with the symbol
or (if the GPS receiver is connected).
to call up the list of known devices.
89
.
(if the headphones are connected)
symbol.