Exporting And Deleting Measurement Series From The Indicator Unit - Megger digiPHONE+2 User Manual

GPS data export and firmware update
8.1 Exporting and deleting measurement series from the
indicator unit
Proceed as follows to export measurement series from the indicator unit to the PC:
Exporting
measurement series
Step Action
1
Click on the
Result: The measurement series stored on the device are displayed.
2 Click the measurement series you want to export in order to select them. To
mark multiple measurement series, hold down the Ctrl key.
Or you can mark all the measurement series displayed with a single click
using the button above the measurement series list.
3
Click on to export the marked measurement series.
4 Save the file in the required folder and under the required name.
5 The exported measurement series can be imported in a suitable application
for displaying KML files and displayed there. The measurements recorded at
the individual measurement points also can be reproduced in this way if this is
supported by the application that is used (example image from Google Earth).
icon in menu bar on the left.
91