4.2.1.1 Adjusting The Basic Settings - Megger digiPHONE+2 User Manual

Pinpointing Cable Faults in "Digiphone" Mode

4.2.1.1 Adjusting the Basic Settings

After the indicator unit has been switched on, you can adjust the basic settings. To do so,
switch to the menu screen by pressing the knob and selecting the menu item
following menu then appears in the display:
You can enter the following basic settings in this menu (the second menu level can be
called up via menu item ... ):
Menu
Description
item
Activates/deactivates Automatic Proximity Mute (APM).
If this function is activated, the headphones are muted as soon as the
operator touches the sensor's telescopic handle with their hand. This
protects the operator from excessively loud background noise which often
occurs when the sensor is moved.
Activates/deactivates the fault arrow.
When the fault direction indicator is activated, an additional direction arrow
(see page 30) in the display signals whether the user has moved towards or
away from the fault.
This menu item allows the display unit to be connected to a Bluetooth-
enabled headset or GPS receiver (see page 87).
When connected to a GPS receiver, the GPS coordinates transmitted by
the GPS receiver are permanently displayed on the measurement screen.
25
. The