Line Location And Tracing Using The Ifs Receiver; Basics For Using The Ifs Receiver - Megger digiPHONE+2 User Manual

Table of Contents

Line and probe location in "Ferrolux" mode

5.3

Line location and tracing using the iFS receiver

5.3.1

In order for the orientation aids displayed on the indicator unit (such as path of the line,

direction arrows and signal flow direction) to also actually reflect the correct position and

alignment with reference to the line or probe to be located, the receiver must be carried

laterally in front of or next to the body, and the side marked

The indicator unit must be worn on the body so that the connections are located at the

side furthest away from the body.

To ensure that the user has the most ergonomic posture possible, the handle of the

receiver can be rotated around its axis in steps of 90°. To do this, push the handle

downwards a little until it noticeably engages in the required position.

must be facing the front.

Table of Contents

Do you have a question about the digiPHONE+2 and is the answer not in the manual?

Digiphone+2 ntDigiphone+2 ntrx