Table of Contents
Advertisement
An AudioFuse X8 OUT and an AudioFuse X8 IN configured for rackmounting
Attach the rack ears and connection plates in the configuration shown above, and the
AudioFuse X8 OUT and its companion X8 OUT or X8 IN are ready to slot into your rack.
We recommend rackmounting the AudioFuse X8 units with an open rackspace above or below them,
to assist with keeping them cool during operation.
2.3. Registration
Once you've set up your hardware, the next part of the process is to register it with Arturia.
Registration will help you if you should need technical support; it's always a good idea to
take a moment and do this before you get started.
Follow the instructions you'll find in the box with your unit to log onto the Arturia website and
register it. You will need a serial number and unlock code, which you will find on the bottom
of the unit.
Registering your AudioFuse X8 OUT gives you access to current documentation (including
this User Manual).
Arturia - User Manual AudioFuse X8 OUT - Hardware Setup and Registration
5
Advertisement
Table of Contents
Need help?
Do you have a question about the AUDIOFUSE X8 OUT and is the answer not in the manual?
Questions and answers