Download Print this page

Important Safety Instructions; For Household Use Only - Shark POWERDETECT AZ4000 Series Owner's Manual

Upright vacuum with detect technology, duoclean detect, powered lift-away, self-cleaning brushroll, and odor neutralizer technology

Advertisement

IMPORTANT SAFETY INSTRUCTIONS

FOR HOUSEHOLD USE ONLY

WARNING
To reduce the risk of fire, electric shock, injury, or property damage, when using
an electrical appliance, basic precautions should always be followed, including
the following:
READ ALL INSTRUCTIONS BEFORE
USING THIS VACUUM
1.
Inspect power cord and plug for any
damage before use. DO NOT use
vacuum cleaner with a damaged cord
or plug. Turn off all controls before
plugging in or unplugging the vacuum
cleaner. Store your vacuum cleaner
with the power cord secured around
the two cord hooks. To minimize
the risk of power cord damage, do
not allow the motorized brush roll
to ingest the cord. If this occurs,
immediately shut off power to the
vacuum and remove the cord.
2. This appliance has a polarized plug.
If the plug does not fit fully into the
outlet, reverse the plug (one blade is
wider than the other). If it still does
not fit, contact a qualified electrician.
DO NOT force into outlet or try to
modify to fit.
3. Your vacuum cleaner may consist of
a motorized nozzle, wand, hose, and/
or vacuum pod. This device contains
electrical connections, electrical
wiring, and moving parts that
potentially present risk to the user.
The hose contains electrical wires.
Do not use when damaged, cut, or
punctured.
4. Use only identical replacement parts.
5. Carefully observe and follow the
instructions provided below to avoid
improper use of the appliance.
DO NOT use the vacuum for any
purpose other than those described in
this manual.
6. Before use, carefully inspect all parts
for any damage. DO NOT use if any
parts are damaged.
7.
The use of an extension cord is
NOT recommended.
8. This vacuum cleaner contains
no serviceable parts.
s h a r kc l e a n . c o m
9. This appliance can be used by
persons with reduced physical,
sensory, or mental capabilities or
lack of experience and knowledge
if they have been given supervision
or instruction concerning use of
the appliance in a safe way and
understand the hazards involved.
Cleaning and user maintenance shall
not be made by children. Keep the
appliance and its cord out of reach of
children. DO NOT allow the appliance
to be used by children. DO NOT allow
to be used as a toy. Close supervision
is necessary when used near children.
10. Always turn off the vacuum cleaner
before connecting or disconnecting
any motorized nozzles, hose, or other
accessories.
11. DO NOT handle plug or vacuum
cleaner with wet hands.
12. DO NOT use without filters in place.
13. Only use Shark® branded filters
and accessories.
14. DO NOT damage the power cord:
a) DO NOT pull or carry vacuum
cleaner by the cord or use the cord
as a handle.
b) DO NOT unplug by pulling on cord.
Grasp the plug, not the cord.
c) DO NOT run the vacuum cleaner
over the power cord, close a door
on the cord, pull the cord around
sharp corners, or leave the cord
near heated surfaces.
15. DO NOT put any objects into nozzle
or accessory openings. DO NOT use
with any opening blocked; keep free
of dust, lint, hair, and anything that
may reduce airflow.
16. DO NOT use if nozzle or accessory
airflow is restricted. If the air paths or
the motorized floor nozzle become
blocked, turn the vacuum cleaner
off and unplug from electrical outlet.
Remove all obstructions before you
plug in and turn on the unit again.
17. Keep nozzle and all vacuum openings
away from hair, face, fingers,
uncovered feet, or loose clothing.
18. DO NOT use if vacuum cleaner is
not working as it should, or has been
dropped, damaged, left outdoors, or
dropped into water.
19. Use extra care when cleaning on stairs.
20. DO NOT leave the vacuum cleaner
unattended while plugged in.
21. When powered on, keep the vacuum
cleaner moving over the carpet
surface at all times to avoid damaging
the carpet fibers.
22. DO NOT place vacuum cleaner on
unstable surfaces such as chairs
or tables.
23. Your Shark® vacuum may not
be designed to stand up on its own.
When taking a break from cleaning,
you may need to lean it against
furniture or a wall, or lay it flat
on the floor. Using the vacuum
for an application where the unit lacks
stability may result in personal injury.
24. DO NOT use to pick up:
a) Liquids.
b) Large objects.
c) Hard or sharp objects
(glass, nails, screws, or coins).
d) Large quantities of dust (drywall
dust, fireplace ash, or embers).
DO NOT use as an attachment to
power tools for dust collection.
e) Smoking or burning objects
(hot coals, cigarette butts,
or matches).
f) Flammable or combustible
materials (lighter fluid, gasoline, or
kerosene).
g) Toxic materials (chlorine bleach,
ammonia, or drain cleaner).
25. DO NOT use in the following areas:
a) Poorly lit areas.
b) Wet or damp surfaces.
c) Outdoor areas.
d) Spaces that are enclosed and may
contain explosive or toxic fumes
or vapors (lighter fluid, gasoline,
kerosene, paint, paint thinners,
mothproofing substances, or
flammable dust).
26. Turn off all controls before plugging in
or unplugging the vacuum.
SAVE THESE INSTRUCTIONS
27. Observe the following when
interacting with the Odor Neutralizer
Technology cartridge:
a) DO NOT attempt to disassemble
Odor Neutralizer Technology
cartridge.
b) Avoid direct contact with the
fragrance pod in the cartridge.
c) DO NOT directly inhale from the
Odor Neutralizer Technology
cartridge.
d) Keep away from children and pets.
e) Keep away from heat, sparks, and
open flame.
f) DO NOT place in direct sunlight.
FRAGRANCE CARTRIDGE FIRST AID
a) Avoid contact with fabrics and
finished surfaces.
b) Eye contact: Remove contact lenses
if present. Rinse continuously with
water for several minutes.
c) Skin contact: Wash hands
thoroughly after handling. If
irritation or rash develops, seek
medical advice/attention.
d) Inhalation: Move person to fresh air
if they are experiencing any
respiratory symptoms. If symptoms
persist, seek medical advice/
attention.
e) Ingestion: DO NOT induce
vomiting. Seek medical advice/
attention.
28. Unplug from electrical outlet when not
in use and before any maintenance or
cleaning.
29. Hand wash with water only.
Washing with cleaning chemicals
could damage the unit.
30. During cleaning or routine
maintenance, DO NOT cut anything
other than hair, fibers, or string
wrapped around the brushroll.
31. Allow all filters to air-dry completely
before replacing in the vacuum to
prevent liquid from being drawn into
electric parts.
32. Make sure the dust cup and all filters
are in place after routine maintenance.
33. If provided, secure the power
cord around the two cord hooks
during storage.
s h a r kc l e a n . c o m

Advertisement

loading
Need help?

Need help?

Do you have a question about the POWERDETECT AZ4000 Series and is the answer not in the manual?

Questions and answers

Courtney Cass
January 25, 2025

I vacuumed up some baking powder and now I want to clean it out. How do I do that?

1 comments:
Mr. Anderson
February 10, 2025

To clean baking powder out of the Shark POWERDETECT AZ4000 Series vacuum, follow these steps:

1. Turn Off and Unplug – Ensure the vacuum is turned off and unplugged from the electrical outlet.
2. Empty the Dust Cup – Remove the dust cup and empty any baking powder inside.
3. Check for Blockages – Inspect the hose, wand, and nozzle for any clogs and remove debris.
4. Clean the Filters – The HEPA filter should be cleaned every year, and the pre-motor filters should be replaced every 2.5 years. Remove the filters and tap off excess dust. If necessary, rinse with water and allow them to dry completely before reinstalling.
5. Clean the DirtDetect Sensors – If the DirtDetect Indicator is red, clean the sensors as hair and fine particles may obstruct them.
6. Reassemble and Test – Once everything is clean and dry, reassemble the vacuum and test its functionality.

Avoid vacuuming fine powders frequently, as they can clog filters and reduce suction efficiency.

This answer is automatically generated

STACY SPRAGGINS
February 23, 2025

Can you turn off the beater bar off where there is just suction on the new PowerDetect power lift away vacuum. On the Navigator Lift Away there is switch on the handle that disengages the beater bar. Does new PowerDetect vacuum have this capability?

1 comments:
Mr. Anderson
February 23, 2025

The manual does not explicitly mention a switch to turn off the beater bar for suction-only mode. However, it does state that for maximum suction for above-floor cleaning, the vacuum should be set to Hard Floor mode, which may imply reduced or no brushroll activity.

This answer is automatically generated

Gilbert
March 27, 2025

What is the length of the brushroll and soft roller?

Save PDF