PCB Piezotronics IMI SENSORS EX640B00 Installation And Operating Manual page 94

Manufacturer:
PCB Piezotronics, Inc.
3425 Walden Avenue
Depew, New York 14043
Certifies that type of equipment:
Whose Product Models Include:
This declaration is applicable to all Vibration Sensor(s) of the above series which have the CE & (EX) ATEX mark on their data
sheets and where those data sheets refer to this declaration of conformity. The data sheets for all model numbers referenced
above, which include the CE & (EX) ATEX mark on such data sheets and refer to this Declaration of Conformity are hereby
incorporated by reference into this Declaration.
Conform to the following EU
Directive(s) when installed per
product documentation:
Harmonized EN 61326-1:2013
Standards
EN 61326-2-3: 2013
EN 61010-1:2010
EN 61010-1:2010/A1:2019/AC:2019-04
EN 61010-1:2010/A1:2019
EN 60079-0:2018
EN 60079-11: 2012
EN IEC 63000:2018
Emissions EN 55011:2016,
Test
EN 55011:2016/A1:2017
Standards
EN 55011:2016/A11:2020
Other EN 61000-4-2:2001
Standards
Applied (non-
OJEU)
EN 61000-4-3:2006
PS053 REV. Q 03/26/2023
EU Declaration of Conformity PS053
In Accordance with ISO/IEC 17050
USA
Vibration Sensor(s)
EX64..., EXTO64..., EXRV64... Series
2014/30/EU
2011/65/EU w/2015/863/EU
2014/34/EU
Harmonized Standards to which Conformity is Declared:
Electrical Equipment for Measurement, Control and Laboratory Use- EMC requirements
- Part 1: General requirements
Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 2-3: Particular requirements - Test configuration, operational conditions and
performance criteria for transducers with integrated or remote signal conditioning
Safety Requirements for Electrical Equipment for Measurement, Control, and
Laboratory Use - Part 1: General Requirements
General Explosive Atmosphere
Intrinsic safe, i
Technical documentation for the assessment of electrical and electronic products with
respect to the restriction of hazardous substances (IEC 63000:2018)
Industrial, scientific and medical (ISM) radio frequency equipment-Electromagnetic
disturbance characteristics- Limits and methods of Measurement Class B
Electromagnetic compatibility (EMC)–Part 4–2: Testing and measuring techniques–
Electrostatic discharge immunity test
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques -
Radiated, radio-frequency, electromagnetic field immunity test
Authorized European Representative:
PCB Piezotronics Europe GmbH
Porschestrasse 20-30
41836 Hückelhoven
Germany
EMC Directive
RoHS Directive
ATEX Directive
Page 1 of 2