TEMPLE & WEBSTER GLOVLDT Assembly Instructions

Read these instructions and follow steps carefully to ensure you assemble the
product correctly and avoid damages. Check that all parts and
hardware have been provided before assembling the product. Place all
contents on a clean, soft-flat surface to avoid scratching the product.
CAUTION:
Only tighten bolts to 80% at first. Once all parts have been assembled, fully tighten all
hardware.
To prevent damage to threads, do not use a power tool and do not overtighten bolts.
Use two people to lift and turn the product when assembling.
Do not attempt with only one person and do not roll onto legs.
Keep all hardware and small parts away from children.
STEP 1: Attach leg frames (C) to frame round top (A) .
Insert caps (1) into leg frames (C), Then insert bolts (1) through frame round top (A) into leg frames (C) as shown
below. Tighten with allen key (4).
A
C
ASSEMBLY INSTRUCTIONS
PART LIST
ITEM DESCRIPTION
A
FRAME ROUND TOP
B
FRAME ROUND BOTTTOM
C
LEG FRAMES
D
BAR TOP 1
E
BAR TOP 2
F
TABLE TOP
STEP 2: Attach frame round botttom (B) to leg frames (C).
Insert caps (1) into leg frames (C), Then insert bolts (1) through frame round botttom (B) into leg frames (C) as
shown below. Tighten with allen key (4).
4
1
CAPS
4
GLOVLDT
HARDWARE LIST
QTY ITEM DESCRIPTION
1
2PCS BOLT M6 x 35
2
2PCS
BOLT M6 x 65
3
8PCS
SCREW M6 x 45
4
2PCS
ALLEN KEY 4
2PCS
1PC
C
B
QTY
32PCS
16PCS
16PCS
2PCS
4
CAPS
1
4