TEMPLE & WEBSTER GLBELSBS Assembly Instructions

Read these instructions and follow steps carefully to ensure you assemble the product
correctly and avoid damages. Check that all parts and hardware have been provided
before assembling the product. Place all contents on a clean, soft-flat surface to avoid
scratching the product.
CAUTION:
Only tighten bolts to 80% at first. Once all parts have been assembled, fully tighten all hardware.
To prevent damage to threads, do not use a power tool and do not overtighten bolts.
Use two people to lift and turn the product when assembling.
Do not attempt with only one person and do not roll onto legs.
Keep all hardware and small parts away from children.
STEP 1: Attach side lid (A) and side lid (D) to back lid (C) and front lid (F). As shown below.
Insert screws (1) through side lid (A) and side lid (D) into back lid (C) and front lid (F).
Do not completely tighten screws at this point.
1
6
A
ITEM DESCRIPTION
A
B
C
D
E
F
C
D
F
ASSEMBLY INSTRUCTIONS
GLBELSBS
PART LIST
QTY
SIDE LID 1PC
TOP LID 1PC
BACK LID 1PC
SIDE LID 1PC
BOTTOM LIDS 2PCS
FRONT LID 1PC
STEP 2: Attach bracket (5) to bottom lids (E). As shown below.
Insert screws (2) through bracket (5) into bottom lids (E).
Do not completely tighten screws at this point.
E
HARDWARE LIST
ITEM DESCRIPTION
1
SCREW M7X65
2
SCREW M4X12
3
SCREW M4X12
4
GAS SPRING
5
BRACKET
6
ALLEN KEY
7
SCREWDRIVER
5
E
QTY
8PCS
28PCS
10PCS
2PCS
8PCS
1PC
1PC
7
2