TEMPLE & WEBSTER GLDRCWNT Assembly Instructions

''Read these instructions and follow steps carefully to ensure you assemble
the product correctly and avoid damages. Check that all parts and
hardware have been provided before assembling the product. Place all
contents on a clean, soft-flat surface to avoid scratching the product."
''CAUTION:
Only tighten bolts to 80% at first. Once all parts have been assembled, fully tighten all
hardware.
To prevent damage to threads, do not use a power tool and do not overtighten bolts.
Use two people to lift and turn the product when assembling.
Do not attempt with only one person and do not roll onto legs.
Keep all hardware and small parts away from children."

STEP 1: Put the chair on the floor and pull the chair frame (C) (as the arrow direction shown)

C
ASSEMBLY INSTRUCTIONS
GLDRCWNT

PART LIST

ITEM DESCRIPTION
A
BACK FABRIC
B
SEAT FABRIC
C
CHAIR FRAME
D
BACK
E
PLASTIC RODS
STEP 2: Attach the back (D) to the chair frame (C). Then insert screws (1) through the back
(D) into the chair frame (C). Fully tighten with allen key (2).
2

HARDWARE LIST

QTY ITEM DESCRIPTION
1
1PC SCREW M6X25
2
1PC ALLEN KEY
1PC
2PCS
2PCS
D
1
C
QTY
2PCS
2PCS