superbrightleds DDAL-R1 User Manual

Important: Read all instructions prior to installation.
Selectable Wattage and CCT Dusk-to-Dawn Area Light
Safety and Notes
• Product should be installed by a certified electrician in
accordance with applicable national, state, and local
building and electrical codes.
• To reduce the risk of electric shock, ensure that the main
power source and circuit breakers are switched off before
performing any installation or wiring procedures.
• Avoid looking directly into the lamp when illuminated.
• Ensure all mounts are securely attached and will support
the weight of the fixture. Failure to properly support
the fixture may result in damage or injury, for which the
manufacturer does not assume responsibility.
Photocell and Shorting Cap
Available bundled with a photocell for automatic dusk-to-dawn
operation or a shorting cap for continuous operation.
Specifications
Model
Environmental Rating
Operating Temperature
Check product label for specific electrical
specifications related to installation.
Improper installation will void warranty.
CCT and Wattage Selection
CCT and wattage are selected using the
switches inside the housing. Unscrew conduit
plugs to access switches.
DDAL-R1-SW3BxS
IP65
-22–113° F (-35°–45° C)
1
Wiring Diagram
Line
Neutral
Ground
Dim (+)
Dim (-)
Rev Date: V1 02/01/2024
4400 Earth City Expy, St. Louis, MO 63045
User Manual
DDAL-R1
DDAL-R1-SW3B60S
120–277 VAC Input
Black
L L
White
N N
Bare Wire
GND GND
Purple
+ +
Pink / Gray
- -
866-590-3533 superbrightleds.com