Before You Get Started - Midea MAP08S1XWT User Manual

BEFORE YOU GET STARTED

Preparations Before Installation
The installation
M a
n u a
must be carried
l
out in strict
accordance with
the instructions
in this manual.
Ambient Temperature Range For Unit Operating:
MODE Temperature Range
Cool
Dry
Know your Portable Air Conditioner
Energy Rating Information
The energy rating and noise information for this unit is based on the standard installation
using an un-extended exhaust duct without window slider adaptor (as shown in the
Installation section of this manual). At the same time, the unit must be operate on the
COOL MODE and HIGH FAN SPEED by remote controller.
The unit with 3 meters extended exhaust duct is running by using 2 exhaust ducts
(Diameter:150mm, Length: 1.5m + Diameter: 130mm, Length: 1.5m).The Energy rating and
noise information for unit with 3 meters extended exhaust duct is not assessed. (For
some models)
NOTE：
We recommend that operating the unit at room temperature below 35°C. Since there is
a risk that the unit with 3 meters extended exhaust duct would not work at room
temperature above 35°C under some extreme conditions, such as the lower air intake be
blocked for 50%.
How to Stay Cool with a New Portable Air Conditioner (For the models comply with the
requirements of Department Of Energy in US)
Because of a new federal test procedure for Portable Air Conditioners, you may notice
that the cooling capacity claims on portable air conditioner packaging are significantly
lower than that of models produced prior to 2017. This is due to changes in the test
procedure, not to the portable air conditioners themselves.
We recommend
doing this with
a helper.
16-35°C (60-95°F)
13-35°C (55-95°F)
Installing
your AC
should take
about
30 minutes.
MODE
Heat(pump heat mode)
Heat(electrical heat mode)
8
We're here if
you need us,
please contact
1-866-646-4332
Temperature Range
5-30°C (41-86°F)
30°C (86°F)
≥