Midea MAP08S1XWT User Manual page 25

Buttons and Functions
Before you begin using your new air conditioner, make sure to familiarize yourself with
its remote control. The following is a brief introduction to the remote control itself. For
instructions on how to operate your air conditioner, refer to the How to Use Basic
Functions section of this manual.
TEMP
Decreases temperate in
1°C/1°F increments.
Min. temperature is
16°C/60°F.
ON/OFF
Turns the unit on or o .
MODE
Scrolls through operation
modes as follows:
AUTO  COOL  DRY 
HEAT  FAN
SWING
Starts and stops the
horizontal louver
movement. Hold down
for 2 seconds to initiate
vertical louver auto
swing feature(some units).
C-SENSE
Temperature sensing and room
temperature display button.
NOTE: Press together the two buttons simultaneously for 5 seconds to lock the keyboard.
Press together the two buttons for 2 seconds to unlock the keyboard.
HEAT
C-SENSE
Press together simultaneously
Model: RG51F2(2)/EFU1
Model: RG51F2(2)/CEFU1
25
TEMP
Increases temperate in
1°C/1°F increments.
Max. temperature is
30°C/86°F.
SPEED
Selects fan speeds in the
following order:
AUTO  LOW  MED  HIGH
TIMER
Sets timer to turn unit on
(see How to Use Basic
Functions for instructions).
Sets timer to turn unit o
(see How to Use Basic
Functions for instructions).
°C/°F
Press this button to
alternate the temperature
display between the
°C & °F.
SLEEP
Saves energy during
sleeping hours.
LED DISPLAY
Press this button to turn
on and turn o the
display on the indoor unit.