Remote Control And App Instructions - Midea MAP08S1XWT User Manual

REMOTE CONTROL AND APP INSTRUCTIONS

Handling the Remote Control
26.2 ft (8 meters)
NOTICE
• Button design is based on typical model and may vary slightly from the actual one
you purchased.
• All the functions described are accomplished by the unit. If the unit is without a
feature, the unit will not respond if the corresponding button on the remote is
pressed.
•
remote control illustration and the actual functions described in the USER'S MANUAL,
the descriptions in the USER'S MANUAL shall prevail.
Model
Rated Voltage
Signal Receiving Range
Environment
Location of the remote control
Use the remote controller within a distance of 26.2 ft
(8 meters) from the air conditioner, pointing it towards
the receiver. Reception is confirmed by a beep.
CAUTION
• The air conditioner will not operate if curtains,
doors or other materials block the signals from the
remote control to the unit.
• Prevent any liquid from spilling onto the remote
control. Do not expose the remote control to
direct sunlight or heat.
• If the infrared signal receiver on the indoor unit is
exposed to direct sunlight, the air conditioner may
not function properly. Use curtains to prevent the
sunlight from falling on the receiver.
• If other electrical appliances react to the remote
control, either move these appliances or consult
your local dealer.
RG51F2(2)/CEFU1 / RG51F2(2)/EFU1
3.0V( Dry batteries R03/LR03×2)
8m
-5°C~60°C(23°F~140°F)
24
the