Setting The Timer With Vcr Plus+ System - Aiwa VX-S135U Operating Instructions Manual

Recordimz with One-Touch Recording (continued)
To stop recording
Press STOP on the remote control or WA STOP/
EJECT on the unit.
To extend the recording duration while
recording
Press REC/OTR until the new duration you want appears
on the screen.
To confirm the remaining time of recording, press REC/OTR
once during One-Touch Recording.
Setting the timer with
VCR
Plus+ svstem
You can greatly simplify timer recordings with VCR Plus+
system. Just enter the VCR Plus+ programming number, a
number assigned to each TV program, and the unit will set
the timer recording automatically. You can find VCR Plus+
programming number in most TV guide magazines.
You can setup to 8 programs. -
VCR PLUS+
If the power is turned off during One-Touch Recording, the
TV turns off, but the VCR continues to record.
. During One-Touch Recording, when the tape reaches the
end, the TIMER REC indicator on the unit flashes.
MENU —
SET/TRACKING —
+1–
Before starting
TV VCRICATV
— number buttons
— T-REC
— ENTER
— CANCEL
Check that the clock is set correctlv.
Check that the channel numbers match the guide channels
which assigned to the TV stations. See page 12.
Inserl a cassette with its erasure prevention tab in place.
Set the TV VCR/CATV selector to TV VCR.
lf the CATV converter is used for the timer recording, check
that the CATV converter is turned on and the channel you
want to record is selected.
1
2
Press VCR PLUS+.
Enter the VCR Plus+ programming number of
the TV program you want to record using the
number buttons.
If you make a mistake, press CANCEL.
PLUSCODE 12.i$~---
}ONCE
DAILY
WEEKLY
<0-9/+ j-/ ENTER/ pR0L3RAM>
25
ENGLISH