Aiwa VX-S135U Operating Instructions Manual page 27

3
4
5
6
7
8
Press SET/TRACl<lNG +/-to select ONCE,
DAILY or WEEKL,Y.
To
record Select
a single program
ONCE
daily program
DAILY
(See right)
weekly program
such as every
Monday (WKL-MOIN)
WEEKLY
Press ENTER.
The following tirmer information appears on the
screen.
If you want to change the setting here, see on the
right.
PLUSCODE 123------
\l;\\/
DATE –2l(MON)-
START z b:3d PM~
END
7:OOPM
CH
023
SPEED SP
<+1-l ENTER lcANcIzLIMENu>
Press ENTER repeatedly until the tape speed
flashes, then press SET/TRACKING +/- to
select SP, LP or !3LP.
r7inia
I
L.1
<+/-/ ENTER jCANCI:LIMENU>
Press
VCR PLUS+.
The timer program Iiet appears.
--
--
L.
<+/-/ ENTECANCI:L:fWW J>J>
Press
MENU
twice to return to the normal
screen.
Press
T-REC.
o The TIMER REC irldicator on the unit lights, and the
unit stands by for timer recording.
o If the TIMER REC indicator does not light, a cassette is
not inserted.
o The cassette is ejected if the cassette's erasure
prevention tab has been removed.
o You can turn the unit off. The unit automatically starts
recording at the programmed time.
To cancel a program
Select TIMER REC SET in the menu. Then press SET/
l-RACKING +/– to select the unnecessary program, and
press CANCEL.
If the program overlaps another
The overlapped portions will be deleted. The program Iistecl
first on the timer program setting screen has priority c~ver
the succeeding program as illustrated.
8
Program 1 -
Program 2 -
Program 3 +
Actual recorded
potiions
'"+00
Prog.1 Prog.2
Prog.3
If "PROGRAM FULL flashes and the timer program list on
step 1, 8 programs are already set, Cancel an unnecessary
program.
o To confirm the setting, select TIMER REC SET in the menu
to display the timer program list. Press MENU twice tc) return
to the normal screen.
. When the power supply is interrupted for more than 5
seconds, the preset program is cleared. In this case, you
have to set the clock and the timer again.
az%?s
During timer recording, when the tape reaches the end, the
TIMER REC indicator on the unit flashes.
To set the daily program
In step 4, press SET/TRACKING+/– repeatedly to display
the desired daily program as follow:
MON-FRI :
Monday to Friday
MON-SAT : Monday to Saturday
SUN - SAT: Everyday
I
SPEED SP
I
To extend the recording time
After step 4, press ENTER repeatedly until the end time
flashes, then press SET/TRACKING +/– to change the
setting.
When the TIMER REC indicator on the unit lights, the
tape functions are not operable. To operate the others,
press T-REC. However, remember to press it again to
activate timer recordings.
ENGLISH
26