Various Search Functions - Aiwa VX-S135U Operating Instructions Manual

Various search functions
INDEX —-
RESET —-
ZERO- ----
RETURN
NW REWl@ —–
TV VCR/CATV
— Number
buttons (1-9)
— CALL
1
— -F FWDl@
—-E STOP
The unit automatically marks an index signal on the tape
each time recording starts. You can use these signals to
find the beginning of any recording.
Before starting
Set the TV VCR/CATV selector to TV VCR.
2!
Press INDEX during stop or playback.
Press the number buttams(l -9) to select the index
number (up to
9).
[
.1/
IN DE X73,:
<1-91-+4Jb/lNDEX>
1
2
3
Press CALL to display the tape counter.
L===l
L.1
Em
0123:45 SP
Press RESET at the point you want to locate later.
3
Press > F FW[) (for succeeding programs) or 4-4
REW (for preceding programs).
The unit starts searching!.
Playback starts automahcally from the beginning c)f the
specified recording.
To search the next index signal
Press INDEX during stop or playback, then press *-
F FWD or - REW. When the next index signal is found,
playback starts automatically.
The tape counter resets to "00:00 :00."
w
10:3OAM SUN CH 023
L.
km
00:00:00 SP
After playback or recording, press STOP, then
;~ER().RETURN,
The tape automatically stops when the tape counter
returns to about "00:00 :00."
Index signals should be at least 2 minutes apart. Otherwise,
the unit cannot detect them properly.
. Index signals may not be cjetected on damaged or worn out
tapes.
Index signal at the beginning of a recorded tape may [notbe
detected.
Index signal may not be detected if it is extremely close to
the point where the search began.
When you insert a cassette, the tape counter is reset to
"00:00 :00."
The tape counter does not work while playing unrecorded
portions of tape.
ENGLISH
2:2