Connecting The Antenna - Aiwa VX-S135U Operating Instructions Manual

Connecting the antenna
VX-S135
u
Y
'., >
.-
75-ohm
1-
coaxial cable
(not supplied)
i
11
300-ohm twin-lead cable
----
; (not supplied)
I
/$ ~;;;:;daPtor
s
s
- AC cord hook
~—+
z To AC outlet
Connect the anteinna cable to the UHF/VHF connector on the unit.
If the cable is a round-type 75-ohm coaxial cable, connect it directly to the UHF/VHF connector.
[f the cable is a flat-type 300-ohm twin-lead cable, connect it to the antenna adaptor(supplied), and connect the adaptor to
the UHF/VHF connector.
When you use VX-S 135U, the antenna adaptor can be taken out from the supplied telescopic antenna.
Connect the
AC
cord to the
AC
wall outlet after passing it through the AC cord hook.
To use the security hook for safety (VX-S205 only)
1-0 prevent the unit from falling during earthquakes, etc., affix the unit to a wall or pillar with the security hook on the rear using
the strong twine or wire.
VX-S205
Security
hook
CONTINUE "lI+Mw.-
f3VGLlSH
4