HighPoint RocketRAID 404 User Manual page 18

Adapter Installation
If
HPT374 UDMA/ATA133 RAID Controller
exists in the popup Device Manager
has been successfully installed.
Otherwise, if user cannot find these four device items, or there is
device icon, it indicates that the driver has not been correctly installed and user
need to delete the devices and reinstall the drivers.
Windows XP
Install driver under existing Windows XP
After Windows XP is start-up, Windows system will automatically find the newly
installed adapter and prompt user to install its driver. Please follow these steps to
install the driver:
1. When the
Found New Hardware Wizard
location(Advanced), and click
list or specify
2. In the follow-up window, please select
install, then click
3. In the follow-up window of device list, please select
and then click Next
4. In the next window, click on
into the follow-up window, then click
A:\Win_XP
install driver from CD-ROM make sure input the correct path, for example,
D:\RR404\Windows\Driver\Win_XP);
5. In the follow-up window, select
then click Next to continue;
6. In the follow-up window, click on
the first part of driver installation;
7. Next, Windows will find another hardware, please repeat steps 1 and 6, then
the below window will appear:
2-9
and
window (see above), it indicates that the driver
window appears, select
Don't search, I will choose the driver to
Next to continue;
to continue;
Disk..., then type in the driver location:
Have
HPT374 UDMA/ATA133 RAID
Continue
HighPoint RCM Device
or marks on
? !
Install from a
to continue;
Next
SCSI and RAID controllers,
to continue(if users
OK
Controller,
Anyway, then click Finish
items
to finish