Troubleshooting And Support; Troubleshooting For Operation With Plc; Troubleshooting With Service Software; Technical Support - Levitronix BFS-i06 User Manual

6 Troubleshooting and Support

6.1 Troubleshooting for Operation with PLC

The integrated PLC provides status and error signals. However, the source of error cannot be identified by
these signals. For detailed analysis and debugging it is recommended to use the Levitronix
(see below). Alternatively, the Status, Error, Warning and Message bytes can be read using Modbus
commands on the RS485 interface. The firmware specification document, available at the Levitronix
Technical Service Department (see below), contains all details for configuration and interpretation of these
commands.

6.2 Troubleshooting with Service Software


The Levitronix Service Software allows communication with the bearingless fan in connection with a PC and
an RS485 to USB converter (see Table 2).
The Service Software can be used to operate the system, for troubleshooting, parameter logging and user
specific system configuration. For usage of the Service Software contact the technical support (below).

6.3 Technical Support

For troubleshooting, support, and detailed technical information contact Levitronix
Department:
PL-3502-00, Rev04, DCO# 24-054 This document and its content is confidential and the property of Levitronix
disclosed or used for manufacturing or sale of Levitronix

Levitronix
Technical Service Department
Bändliweg 30
CH-8048 Zurich
Switzerland
Phone for US:
Phone for outside US:
E-Mail:
888-569 07 18
+1 888-569 07 18
TechSupport@levitronix.com
® and shall not be reproduced, distributed,
® products without the expressed written consent of Levitronix
User Manual for BFS-i06
www.levitronix.com

Service Software

Technical Service
® .
®
22