Encryption Code Set; Adjusting The Encryption Code - Zaxcom RX200 User Manual

Zaxcom RX200

Encryption Code Set

ID1: 000
ENCRYPTION CODE
This menu is where the encryption is turned on and the code is set. This code needs to match the encryption
code of the associated transmitters. If an encryption code is set on the transmitter the transmitted audio will
be encrypted and can only be listened to if the RX200 has the same matching encryption code entered. When
the codes do not match, all that will be heard is white-noise.
These two sets of numbers are formed into a single six-digit encryption code which provides a total of
16,777,216 possible combinations

Adjusting the encryption code

To change the designated character, press the INC or DEC key
1.
Press the menu key to advance to the next character.
2.
To exit this page, press and hold the MENU key.
3.
ID0: 000
For non-encrypted operations all six numbers should be set to 0.
.
13
Frequency Presets