Zaxcom RX200 User Manual page 20

Zaxcom RX200
Specifications
Receiver
Receiver RF Channels: 1
Diversity method: antenna switching
RF Modulation: proprietary digital method
RF Frequency Range: 518 to 698 MHz
RF Frequency Step: 100 KHz
RF Signal Bandwidth: 200 KHz
Channel Separation: 500 KHz (700 KHz recommended)
Sensitivity: -114 dBm
Antenna Connector: 50-ohm SMA female (x 2)
Receiver Audio – Analog Output (x 2)
Dynamic Range: 116 dB
Distortion: 0.002%
Frequency Range: 20Hz to 16kHz
DAC Bit-depth: 24 bits
Connector: TA-5M
Audio Output: Active analog balanced
Audio Output Level: -35dBm (mic), -10dBm (consumer) or 0dBm (line)
Receiver Audio – Digital Output
Signal Format: AES Balanced
AES dynamic range: 123dB
Frequency Range: 20Hz to 16kHz
AES output: AES3 balanced at 96KHz
Audio Output Connector: TA-5M
Timecode
Timecode output connector: BNC
Timecode output level: .01VPP, .2VPP, .5VVP, .9VPP, 1.5VPP
Time code output rate: 23.98, 24, 25, 29.97 ND, 29.97 DF, 30
Power
External Power: 6 to 18 VDC (140mA @ 12VDC)
Power Connector: Switchcraft 760k
Internal Power: 4 AA Batteries
Li-Ion Battery Life: Up to 12 hours
NiMH Battery Life: Up to 8.5 hours
Alkaline Battery life: Up to 7 hours
Miscellaneous
Serial Control Port: RS422
Weight: 7.7 oz. (without internal batteries)
Dimensions: 1.0" x 3.5" x 3.5" (25mm x 89mm x 89mm)
Display: Graphic White OLED Panel
20
Specifications