Table of Contents
Advertisement
How your programmable thermostat works
When the thermostat is in the AUTO mode, it will operate according
to the times and temperatures that have been programmed. The user
can select from 6 di erent programs per day - each with a time and a
temperature.
There is no OFF time, only a higher and a lower temperature.
If the user wants the thermostat to be OFF at a certain time, set the
temperature for this time to be low. The thermostat will turn ON if the
room temperature is lower than the setpoint for the current period.
Example: If P1 is set to be 21˚C at 6am, and if P2 is set to be 10˚C at
8am, the thermostat will look for the temperature to be 21˚C between
6am and 8am.
8
RFRP
Room Thermostat
CP4
V2
V2
Advertisement
Table of Contents
Need help?
Do you have a question about the CP4 V2 and is the answer not in the manual?
Questions and answers
In programming the controller how do you set the on and off times for the heating
To set the on and off times for heating in the EPH Controls CP4 V2 controller:
1. Press the PROG button.
2. If in 5/2 Day mode, programming for Monday to Friday is selected first.
3. Use the + and - buttons to adjust the P1 time, then press confirm.
4. Use the + and - buttons to adjust the P1 temperature, then press confirm.
5. Repeat this process for P2 to P6 times and temperatures.
6. After completing Monday to Friday, programming for Saturday and Sunday is selected.
7. Adjust P1 to P6 times and temperatures using the same process.
8. Press confirm to save the settings.
For 7 Day mode, each day can be programmed individually. In 24 Hour mode, all 7 days share the same times and temperatures.
This answer is automatically generated