Table of Contents
Advertisement
Important Notes
Good quality batteries are essential to ensure the correct operation of
ƒ
this product. EPH recommend using Duracell or Energiser batteries.
Do not use low quality battery brands as they can cause the following
ƒ
problems:
- Stop the wireless communication with the receiver.
ƒ
- Can cause the thermostat to reset.
ƒ
- Can cause the thermostat to display the incorrect information.
ƒ
• When the battery low symbol appears on the CP4
ƒ
EMBER App. The batteries should be changed immediately.
• If a
Symbol appears on your thermostat screen, please see page 21
ƒ
for unlocking instructions.
• If 'OVERRIDE' appears on your thermostat screen, please see page 27.
ƒ
ƒ
12
RFRP
Room Thermostat
V2
, CP4
V2
V2
CP4
V2
-HW or
Advertisement
Table of Contents
Need help?
Do you have a question about the CP4 V2 and is the answer not in the manual?
Questions and answers
In programming the controller how do you set the on and off times for the heating
To set the on and off times for heating in the EPH Controls CP4 V2 controller:
1. Press the PROG button.
2. If in 5/2 Day mode, programming for Monday to Friday is selected first.
3. Use the + and - buttons to adjust the P1 time, then press confirm.
4. Use the + and - buttons to adjust the P1 temperature, then press confirm.
5. Repeat this process for P2 to P6 times and temperatures.
6. After completing Monday to Friday, programming for Saturday and Sunday is selected.
7. Adjust P1 to P6 times and temperatures using the same process.
8. Press confirm to save the settings.
For 7 Day mode, each day can be programmed individually. In 24 Hour mode, all 7 days share the same times and temperatures.
This answer is automatically generated