P0 8 Pin Lock - EPH Controls CP4 V2 Installation And Operation Manual

P0 8 PIN Lock

This function allows the user to put a PIN lock on the thermostat.
There are two options available.
'OPt 01' . The thermostat is fully locked.
'OPt 02'. This will reduce the functionality of the thermostat.
The user will be able to change the mode between AUTO and OFF.
Set Up the PIN
Press and hold
PROG
'P01' will appear on the screen.
+
until 'P08 & PIn' appears on the screen.
Press
+
. 'OFF' will appear on the screen.
Press
+
Press to select ON.
Press . Press
+
. '0000' will ash on the screen.
Press
+
Press to set the value for the rst digit.
Press to con rm and move to the next PIN digit.
When the last digit of the PIN is set, press
OFF
and for 5 seconds.
+
to select 'OPt 01' or 'OPt 02'.
RFRP Room Thermostat
V2
.
CP4
V2
43