During Use - Sharp K-60D19BM1-EN User Manual

Table of Contents

Advertisement

• Any materials (i.e. cabinets) around the appliance
must be able to withstand a minimum temperature
of 100°C.
• The appliance must not be installed behind a
decorative door, in order to avoid overheating.

1.3 DurinG uSe

• When you first use your oven you may notice a
slight smell. This is perfectly normal and is caused
by the insulation materials on the heater elements.
We suggest that, before using your oven for the
first time, you leave it empty and set it at maximum
temperature for 45 minutes. Make sure that the
environment in which the product is installed is well
ventilated.
• Take care when opening the oven door during or
after cooking. The hot steam from the oven may
cause burns.
• Do not put flammable or combustible materials in or
near the appliance when it is operating.
• Always use oven gloves to remove and replace food
in the oven.
• Under no circumstances should the oven be lined
with aluminium foil as overheating may occur.
• Do not place dishes or baking trays directly onto the
base of the oven whilst cooking. The base becomes
very hot and damage may be caused to the product.
Do not leave the oven unattended while cooking
with solid or liquid oils. They may catch fire under
extreme heating conditions. Never pour water on to
flames that are caused by oil, instead switch the oven
off and cover the pan with its lid or a fire blanket.
• If the product will not be used for a long period of
time, turn the main control switch off.
EN - 7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the K-60D19BM1-EN and is the answer not in the manual?

Questions and answers

Donna Mulholland
April 29, 2025

How do you replace the outer glass assembly

User image 68110ab2e3465
1 comments:
Mr. Anderson
May 15, 2025

To replace the outer glass assembly on a Sharp K-60D19BM1-EN:

1. Remove the glass by pulling it out in the direction of A after releasing it from the location bracket (x).
2. To replace, push the glass toward and under the location bracket (y) in the direction of B.
3. Then, place the glass under the location bracket (x) in the direction of C.

If the oven has a triple glass door, the third glass layer can be removed and replaced in the same way as the second layer.

This answer is automatically generated

Table of Contents