Table of Contents
Advertisement
• Make sure the appliance control knobs are always
in the "0" (stop) position when it is not in use.
• The trays incline when pulled out. Take care not
to spill or drop hot food while removing it from the
ovens.
• Do not place anything on the oven door when it is
open. This could unbalance the oven or damage the
door.
• Do not hang towels, dishcloths or clothes from the
appliance or its handles.
1.4 DurinG CleaninG anD MaintenanCe
• Make sure that your appliance is turned off at
the mains before carrying out any cleaning or
maintenance operations.
• Do not remove the control knobs to clean the control
panel.
• To maintain the efficiency and safety of your
appliance, we recommend you always use original
spare parts and to call our authorised service agents
in case of need.
CE Declaration of conformity
We declare that our products meet the
applicable European Directives, Decisions
and Regulations and the requirements listed
in the standards referenced.
This appliance has been designed to be used only
for home cooking. Any other use (such as heating a
room) is improper and dangerous.
The operating instructions apply to several models.
You may notice differences between these instructions
and your model.
EN - 8
Advertisement
Table of Contents
Need help?
Do you have a question about the K-60D19BM1-EN and is the answer not in the manual?
Questions and answers
How do you replace the outer glass assembly
To replace the outer glass assembly on a Sharp K-60D19BM1-EN:
1. Remove the glass by pulling it out in the direction of A after releasing it from the location bracket (x).
2. To replace, push the glass toward and under the location bracket (y) in the direction of B.
3. Then, place the glass under the location bracket (x) in the direction of C.
If the oven has a triple glass door, the third glass layer can be removed and replaced in the same way as the second layer.
This answer is automatically generated