Related Manuals for Planet LCG-300 Series
Summary of Contents for Planet LCG-300 Series
- Page 1 Quick Installation Guide Industrial LoRaWAN Gateway LCG-300 Series Quick Installation Guide...
-
Page 2: Table Of Contents
Quick Installation Guide 1. Package Contents Thank you for purchasing PLANET Industrial LoRaWAN Gateway, LCG-300 series. The descriptions of these models are as follows: Industrial LoRaWAN Gateway with 5-Port 10/100/1000T LCG-300 Industrial LoRaWAN Wireless Gateway with 5-Port 10/100/1000T LCG-300W Industrial LoRaWAN + 5G NR Cellular Gateway with 5-Port... - Page 3 Google Chrome, Microsoft Edge or Mozilla Firefox Note: access the LoRaWAN Gateway. If the Web interface of the LoRaWAN Gateway is not accessible, please turn off the anti-virus software or firewall and then try it again. - 3 - PLANET Technology Corp.2024 ©...
-
Page 4: Gateway
Step 1: Connect the LoRa antenna to the LoRa antenna extender. Step 2: Fasten the LoRa antenna extender to the connector on the front panel of the LoRaWAN Gateway. LoRa Antenna Antenna Extender - 4 - PLANET Technology Corp.2024 ©... - Page 5 Step 1: Fasten the two dual-band antennas to the antenna connectors on the front panel of the LoRaWAN Gateway. Step 2: You can bend the antennas to fit your actual needs. Two Wi-Fi RP-SMA Connectors - 5 - PLANET Technology Corp.2024 ©...
- Page 6 B. Pull out the tray gently from the tray slot. Place the SIM card on the tray with the gold-colored contacts facing upwards. C. Insert the tray back into the tray slot. A mini SIM card with 5G NR and 4G LTE subscription - 6 - PLANET Technology Corp.2024 ©...
-
Page 7: Nr Antenna
OFF to prevent from getting an electric shock. 1. Insert positive and negative DC power wires into contacts 1 and 2 for POWER 1, or 5 and 6 for POWER 2. - 7 - PLANET Technology Corp.2024 ©... -
Page 8: Antenna Dust Cap 1 3
Quick Installation Guide LCG-300/LCG-300W LCG-300-NR Please make sure the input voltage is in accordance with the specifications of the LoRaWAN Gateway. 2. Tighten the wire-clamp screws for preventing the wires from loosening. - 8 - PLANET Technology Corp.2024 ©... -
Page 9: Rj45 Dust Cap 6 6
The wire gauge for the terminal block should be in the range between 12 and 24 AWG. PWR1 and PWR2 must provide the same DC voltage while CAUTION operating with dual power input. - 9 - PLANET Technology Corp.2024 ©... - Page 10 Insert the wires into the fault alarm contacts 1. The wire gauge for the terminal block should be in the range between 12 and 24 AWG. 2. Alarm relay circuit accepts up to 24V (max.) and 1A current. - 10 - PLANET Technology Corp.2024 ©...
- Page 11 PC should be set to 192.168.1.x (where x is a number between 2 and 254), and the default subnet mask is 255.255.255.0. Figure 4-1: IP Management Diagram When the DHCP server of the LoRaWAN Gateway is enabled, the LAN PC will get IP from the Cellular. - 11 - PLANET Technology Corp.2024 ©...
- Page 12 “admin” (or the password you have changed before) as shown in Figure 4-2. Default IP Address: 192.168.1.1 Default User Name: admin Default Password: admin Default SSID (2.4G): PLANET_2.4G (for LCG-300W) Default SSID (5G): PLANET_5G (for LCG-300W) Figure 4-2: Login Screen - 12 - PLANET Technology Corp.2024 ©...
- Page 13 MAC ID. Figure 4-3: MAC ID Label If you have already changed the password via console or web login, please use this new password to log in and skip steps 3. - 13 - PLANET Technology Corp.2024 ©...
- Page 14 Figure 4-4: Web-based Main Screen of LoRaWAN Gateway Now, you can use the Web management interface to continue the LoRaWAN Gateway management or manage the LoRaWAN Gateway by console interface. Please refer to the user’s manual for more. - 14 - PLANET Technology Corp.2024 ©...
- Page 15 15 seconds. After the device is rebooted, you can log in the management Web interface within the same subnet of 192.168.1.xx. Reset Button Figure 5-1: LCG-300 Series Reset Button - 15 - PLANET Technology Corp.2024 ©...
- Page 16 Quick Installation Guide 6. Customer Support You can browse our online FAQ resource and User’s Manual on PLANET Web site first to check if it could solve your issue. If you need more support information, please contact PLANET support team.
Need help?
Do you have a question about the LCG-300 Series and is the answer not in the manual?
Questions and answers