Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Planet LCG-350W-NR
Summary of Contents for Planet LCG-350W-NR
- Page 1 Industrial Outdoor LoRaWAN 5G NR Cellular Gateway LCG-350W-NR Quick Installation Guide...
- Page 2 3.1 SIM Card Installation ................5 3.2 Wiring the Ethernet Cable Installation ............6 3.3 Wall Hanging and Pole Mounting Installation ..........7 4. Starting Web Management ................9 5. Recovering Back to Default Configuration ............12 6. Connecting to PLANET NMS-AIoT ..............13 7. Customer Support ..................16...
- Page 3 1. Package Contents Thank you for purchasing PLANET Industrial Outdoor LoRaWAN 5G NR Cellular Gateway, LCG-350W-NR. The description of this model is as follows: Model Name Description LCG-350W-NR Industrial Outdoor LoRaWAN 5G NR Cellular Gateway “LoRaWAN Gateway” is used as an alternative name in this Quick Installation Guide.
- Page 4 2. Requirement z Workstations running Windows 7/8/10/11, macOS 10.12 or later, Linux Kernel 2.6.18 or later, or other modern operating system are compatible with TCP/IP Protocols. z Workstations are installed with Ethernet NIC (Network Interface Card) z Ethernet Port Connection ...
- Page 5 3. Hardware Installation Refer to the illustration and follow the simple steps below to quickly install your LoRaWAN Gateway. 3.1 SIM Card Installation A. Unscrew the two screws on the device's cover to remove it. B. Insert the SIM card according to the instructions on the SIM card interface.
- Page 6 C. Reattach the device's cover and tighten the screws securely. A mini SIM card with 5G NR and 4G LTE subscription 3.2 Wiring the Ethernet Cable Installation Follow Step 1 to put the network cable through the waterproof connector, and tighten the connector securely as shown in Step 2.
- Page 7 3.3 Wall Hanging and Pole Mounting Installation Wall hanging Step 1: Lock the base to the device. Step 2: Connect the wall bracket to the base and fasten the screws. Step 3: Drill 4 holes with a 3mm diameter on the wall. The horizontal and vertical distances between the 2 holes are 69.4mm and 45.5mm, respectively.
- Page 8 Step 5: The switch, shown in the picture below, can now be hung on the wall. Place against a wall 69.41mm 3mm Screw Hang up 45.5mm 4G/5G Pole mounting To install the base and wall bracket, refer to Step 1 and Step 2 in Device Installation (Wall Hanging).
- Page 9 4. Starting Web Management The following shows how to start up the Web Management of the LoRaWAN Gateway. Note the LoRaWAN Gateway is configured through an Ethernet connection. Please make sure the manager PC must be set to the same IP subnet address.
- Page 10 (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. PLANET Technology Corp. Made in Taiwan Figure 4-3: MAC ID Label If you have already changed the password web login, please use this...
- Page 11 After entering the password, the main screen appears as shown in Figure 4-4. Figure 4-4: Web-based Main Screen of LoRaWAN Gateway Now, you can use the Web management interface to continue the LoRaWAN Gateway management or manage the LoRaWAN Gateway by console interface. Please refer to the user’s manual for more.
- Page 12 15 seconds. After the device is rebooted, you can log in the management Web interface within the same subnet of 192.168.1.xx. Type-C (Reserved) TF Card Slot (Reserved) Nano SIM Slot Reset Button Figure 5-1: LCG-350W-NR Reset Button...
- Page 13 6. Connecting to PLANET NMS-AIoT Set up the NMS-AIoT Controller with an Ethernet connection for the first-time configuration shown in the topology below. Non-LoRa Devices Watt LoRa Node Controller LoRaWAN Sensor NMS-AloT Outdoor LoRaWAN Gateway LCG-350W-NR 100BASE-TX UTP Launch the Web browser (Google Chrome is recommended.) and enter the default IP address https://192.168.1.100:8888 of NMS-AIoT.
- Page 14 1. In NMS-AIoT, press the “Menu” icon . Then click “Devices Management” and “Devices List” to go to devices list page. 2. Press the “plus” icon to open the page to add a new device.
- Page 15 Enter the relevant data for the LoRaWAN gateway. 4. Set up the LoRaWAN gateway on the LCG series device Select PLANET NMS-AIoT as the application server. Then, enter the IP address of NMS-AIoT and apply the settings. After setting, it will be shown in the device list in Web UI of NMS-AIoT.
- Page 16 (Please select your model name from the drop-down menu of Product Models.) Copyright © PLANET Technology Corp. 2024. Contents are subject to revision without prior notice. PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners.
Need help?
Do you have a question about the LCG-350W-NR and is the answer not in the manual?
Questions and answers