Mesh Reach-Out Request; Reset Mesh - Sena 50S User Manual

7 MESH INTERCOM

7.7 Mesh Reach-Out Request

You (caller) can send a request message to turn on the Mesh Intercom
to nearby* friends who have it turned off.
1. If you want to send or receive a request message, you need to enable
Mesh Reach-Out on the Sena Motorcycles App. Please refer to
Section 14.2: "Software Configuration Setting."
2. While your headset's Mesh Intercom is on, you (caller) send a request
message using the headset's Button or the Sena Motorcycles App.
[Caller]
=
3. Friends who receive the request message need to manually turn
on their Mesh Intercom using the headset's Button or the Sena
Motorcycles App.
Note:
• *: Up to 100 m (109 yds) in open terrain
• To use the Mesh Reach-Out Request function,
who sends a request message and the friends who receive
the request message must update the headset to the latest
firmware version and the app to the latest

7.8 Reset Mesh

If a headset in an Open Mesh or Group Mesh resets the Mesh, it will
automatically return to Open Mesh (default: channel 1).
=
M
TAP
3x
M
HOLD
8s
50S Motorcycle Bluetooth
[Caller]
"Mesh reach-out request"
[Nearby Friends]
"Mesh intercom requested"
you (caller)
version.
Communication System with Mesh Intercom™ | 35
®