Subscribe to Our Youtube Channel
Related Manuals for Sena TALKIE
Summary of Contents for Sena TALKIE
- Page 1 USER GUIDE Firmware Version: 1.0.x Last updated on Nov 28, 2024 TALKIE OUTDOOR COMMUNICATION SYSTEM The firmware version 1.0.x indicates that this manual is applicable to all firmware updates within the version 1.0 series.
-
Page 2: Quick Reference
Triple tap check Bluetooth headset Press for 5 seconds pairing Bluetooth headset Press for 2 seconds connect/disconnect Factory reset Press for 10 seconds SENA TALKIE APP Download the Sena TALKIE app from the Google Play Store or the App Store. - Page 3 CLICK ANY SECTION TO BEGIN ABOUT THE TALKIE USING THE TALKIE FIRMWARE UPDATE TROUBLESHOOTING...
-
Page 4: Key Features
MENU ABOUT THE TALKIE Key Features • Mesh Intercom range: 0.4 mi (600 m) • IPx7 Waterproof rating • A variety of mounting accessories • Four sets of interchangeable faceplates • Over-The-Air (OTA) firmware update ① (+) button ② Center button ③ (−) button... -
Page 5: Package Contents
MENU Package Contents Magnetic holder Carabiner Necklace Handlebar mount × 3 Armband holder USB-C protective Rubber pad Long strap cover USB-C charging Interchangeable faceplates cable... - Page 6 MENU Accessories Magnetic Holder Installation Removal Carabiner Necklace...
-
Page 7: Handlebar Mount
MENU Handlebar Mount... - Page 8 MENU Armband Holder Interchangeable Faceplates Removal Installation...
-
Page 9: Volume Control
Adjust the volume using the (+) button and (−) button. You'll hear a single high-tone beep when the maximum volume is reached. Mesh Intercom After powering on the TALKIE, it automatically connects to nearby users on the same channel using the Mesh Intercom. -
Page 10: Channel Selection
• The channel will be automatically saved if no buttons are pressed for 10 seconds on a specific channel. • The channel will be saved even if the TALKIE is turned off. Channel and Battery Check Triple tap the center button to check the Mesh Intercom channel and the battery level. -
Page 11: Bluetooth Headset
MENU Bluetooth Headset The TALKIE allows you to use a Bluetooth headset while still utilizing its built-in microphone for added privacy. • Bluetooth Headset Pairing 1. Press and hold the (−) button for 5 seconds until you hear the voice prompt saying, “Headset Pairing.”... -
Page 12: Firmware Update
TROUBLESHOOTING Factory Reset Press and hold the (−) button for 10 seconds until you hear the voice prompt saying, “Factory reset.” The TALKIE will then reset to its default settings and turn off. Fault Reset If the TALKIE is on but not responding, you can perform a fault reset to restore normal functionality. - Page 13 © 1998–2024 Sena Technologies, Inc. All rights reserved. Sena Technologies, Inc. reserves the right to make any changes and improvements to its product without providing prior notice. Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc.
Need help?
Do you have a question about the TALKIE and is the answer not in the manual?
Questions and answers