C Sensor Configuration - Astralpool Control Connect-PH/ORP line Instruction Manual

23 °C Sensor Configuration
°C
g/L
27.2
T (c)
pH
7.35
7.30
123
ClmV
720
7.30 720
720
25.2
FLOW
°C °C
12:15 OK
12:15
Gas
Flow Switch
pH Clppm Sens
Remote Flow
T (C/F)
27.2
T (c)
Gas
Flow Switch
Freeze-Prot
Heating
Gas
Flow Switch
Remote Flow
T (C/F)
pH Clppm Sens pH Clppm
FLOW OFF
Gas (F.E)
Flow Switch (F.S)
27.2 m3/h
T (c)
g/L 3.0–8.0
TEMP 15.0–35.0
CAL
Gas: Enable/disable gas
pH Clppm Sens
sensor detection.
/Config
Gas
(F.E)
On Off
(F.S)
C
SAVE
Freeze-Prot: Prevents water
pH Clppm Sens
from freezing in the pipes.
/Config
Filtering is switched on if the
Freeze-Prot
(F.E) water temperature drops be-
low the set value (of 1–5 °C).
On Off (F.S)
Once the temperature has
increased to the set value,
filtering stops.
SAVE
T (C/F): Temperature meas-
pH Clppm Sens
urement section: Fahrenheit
/Config
or Celsius.
T (C/F) C
(F.E)
C F
(F.S)
C
SAVE
pH Clppm Sens
Sens
/Config
Gas (F.E)
Flow Switch (F.S)
Freeze-Prot
Heating
pH Clppm
/Config
Flow Switch
Gas
On
Flow Switch
Remote Flow
T (C/F)
pH Clppm
/Config
Heating
Gas
Flow Switch On
Freeze-Prot
Heating
pH Clppm
/Config
MAX/MIN T (C/F)
MAX/MIN T (C/F)
MINIMUM
15.3
MAX/MIN g/L
Reset Config
MAXIMUM
35.0
pH Clppm
/Config
Reset Config
MAX/MIN T (C/F)
MAX/MIN g/L On
Reset Config
Gas Flow: ON
Flow switch: OFF
Temp Scale: °C/°F
48
pH Clppm Sens
/Config
T (C/F) C
MAX/MIN T (C/F)
MAX/MIN gr/L
Reset Config
Flow switch: Enable/disable
Sens
flow sensor detection.
(F.E)
Off
(F.S)
C
SAVE
Heating: The heater acti-
Sens
vates automatically to main-
tain the desired temperature
(F.E)
of the water. The temper-
ature can be set within the
(F.S) Off
range 6–50 °C.
SAVE
MAX/MIN T (C/F): Sets the
Sens
maximum/minimum
of the temperature alarm.
At these values the device
will display the temperature
alarm.
SAVE
Reset Config: To return to
Sens
the default settings. A mes-
sage appears showing the
values to be changed.
Off
- Gas Flow: ON
- Flow switch: OFF
- Temp Scale: °C/°F
SAVE
value