4 Description
Power Supply
Description
Operating voltage
Consumption (W)
Parameters
Control output
Control inputs
Range / Biopool Control OFF / Accuracy
Range / Biopool Control ON / Accuracy
Inductive sensor
Flow switch sensor
Config. Menu System
Remote control (cable)
Data acquisition
Surround
Modbus & Fluidra Pool (compatible)
Probe holder material (PRO)
Connection to piping
Maximum pressure
Operating temperature
pH/ORP/Clppm Sensors
Description
Measurement range
Biopool control range OFF
Biopool control range ON
Accuracy
Calibration
Control outputs (pH) (ORP/PPM)
pH and ORP sensors
Clppm sensor
VSP driver
Description
PH/ORP_LINE
PH/ORP
T (°C)
ORP, Cl2: relay (NO, 0.5A max)
4 x (potential-free max 24 V)
4 potential-free (interlocks)
pH: 0.00–9.99 / 7.00–7.80 / 0.01
ORP: 0–999 / 600–850 / 1 mV
Cl2 (ppm): 0.00–5.00 / 0.30–3.50 / 0.01 ppm
Temp. T (°C): 0–50 °C / 0–50 °C / 0.1 °C
pH: 0.00–9.99 / 6.50-8.50 / 0.01
ORP: 0–999 / 300–850 / 1 mV
Cl2 (ppm): 0.00–5.00 / 0.30–3.50 / 0.01 ppm
Temp. T (°C): 0–50 °C / 0–50 °C / 0.1 °C
Configuration menu: active-inactive
Configuration menu: active-inactive
pH, ORP, Cl2 (ppm), temperature (24 days)
ABS (LINE) / methacrylate derivative (PRO)
AP SD-pH, AP SD-ORP, AP SD-PPM
0.00–9.99 (pH) / 000–999 mV (ORP) / 0.00–5.00 (Clppm)
7.00–7.80 (pH) / 600–850 mV (ORP) / 0.30–3.50 (Clppm)
6.50–8.50 (pH) / 300–850 mV (ORP) / 0.30–3.50 (Clppm)
0.01 pH /
±
Automatic (pH-ORP solutions, ppms electronic board)
Two 230 V / 500 mA outputs (connection for dosing pumps)
Variable speed pump control, up to three speeds
Automatic pneumatic-hydraulic valve control
Automatic filter backwashing
Hourly programming at various filtering rates
28
MODEL
PH/ORP_PRO
PH/PPM_PRO
230 Vac 50/60 Hz.
27 W
PH/ORP
PH/Cl
T (°C)
pH: relay (NO, 0.5A max)
Colour LCD touchscreen
4 digital – 4 relay
ABS
Yes
PVC gluing Ø 63 mm
1 kg/cm
2
15–40 °C max
MODEL
1 mV (ORP) /
0.01 (Clppm)
±
±
Epoxy body, single joint
PVC body + diaphragm.
73471 AP SD-VSP
(PPM)
2
T (°C)
Need help?
Do you have a question about the Control Connect-PH/ORP line and is the answer not in the manual?
Questions and answers