Pro-Form PFEVEX73017.0 User Manual page 10

9. Attach the Tablet Holder (12) to the Console (5)
with four M4 x 16mm Machine Screws (13); start
all the Machine Screws, and then tighten
them.
10. Remove the Seat Knob (68) from the Seat
Carriage (67).
Next, set the Seat Carriage (67) on the Seat
Post (10) and hold it in place.
See the inset drawing. Insert the Seat Knob
(68) upward into the Seat Post (10), and tighten
the Seat Knob into the Carriage Clamp (69)
inside the Seat Carriage (67). Make sure that
the Seat Knob is tightened into the Carriage
Clamp.
9
10
67
68
10
5
12
67
10
13
69
10
68