CAME XTS 7 WH WIFI Installation And Configuration Manual
Wifi touch-screen speaker video-intercom
Hide thumbs
Also See for XTS 7 WH WIFI:
- User manual (25 pages) ,
- Installation and setting manual (21 pages) ,
- User manual (112 pages)
Related Manuals for CAME XTS 7 WH WIFI
Summary of Contents for CAME XTS 7 WH WIFI
- Page 1 Wifi touch-screen speaker video-intercom FB00979-EN XTS 7 WH WIFI XTS 7 BK WIFI XTS 7 WH WFBF INSTALLATION AND CONFIGURATION MANUAL EN English...
-
Page 2: General Precautions
GENERAL PRECAUTIONS Read the instructions carefully before beginning the installation and carry out the actions as specified by the • manufacturer. The installation, programming, commissioning and maintenance of the product must only be carried out by • qualified technicians, properly trained in compliance with the regulations in force, including health and safety measures and the disposal of packaging. -
Page 3: Function Of Terminals
7 End-of-line resistor. Set the bridge only on the last of the line's devices. Function of terminals Local power supply input BUS-line input Landing call input Alarm input Technical data Type XTS 7 WIFI local power supply (V DC) 14 to 18 Maximum draw (mA) Consumption in stand-by mode (mA) Stocking temperature °C... - Page 4 INSTALLING...
- Page 5 to make the device's installation more solid, use the supplied screws and dowels to fasten the frame to the wall. Notes on installing indoor receivers connected to the WiFi network Install the indoor receiver: away from any metal objects that may interfere with the signal, or from any devices that generate magnetic fields.
-
Page 6: Examples Of Installation
Examples of installation Installing four indoor receivers in one home. the WiFi connection need only be active on one indoor receiver. The Apps are associated to the indoor receiver that has an active Wifi connection. MAX 8 VAS/101 VAS/101 LITHOS VAS/100.30 VCM/1D VCM/2D... - Page 7 Device installed in several homes with different types of power-supply units. in a home where several indoor receivers are installed, the WiFi connection need only be active on one of the receivers. The Apps are associated to the indoor receiver that has an active Wifi connection. MAX 8 VAS/101 VAS/101...
- Page 8 Installed at a duplex home, where each home has a device the apps are associated to that indoor receiver that has the active WiFi connection. XDV/304 LITHOS VAS/100.30 VCM/1D VCM/2D UTP/CAT 5 2x1.5mm ≤ 100 ≤ m 100 ≤ m 100 –...
-
Page 9: Advanced Settings
Configuration X2 deo-intercom system. Wrong set- Network tings may cause partial or even total malfunctions; that is why CAME Connect the editing of some parameters Multimedia is allowed only after entering the installer password; the default Credentials password is 112233). - Page 10 Configuration X2 A This button is for sending the SN (serial number) to the Pcs/Xip Send SN software during the programming steps. Manual programming B This button takes you to manual programming of the device. the complete manual pro- gramming procedure for the call is printed in the literature that is issued with the indoor receivers.
- Page 11 I Once you have chosen the connection mode, the button is Type of connection WiFi for selecting and setting up a Wifi network. Enabled Configure WiFi Every 30 seconds the device scans for available networks. Mode DHCP IP address Netmask Save 19:02 Thursday...
- Page 12 B For enabling or disabling the VoIP remote control of the video-in- Keycode tercom call. Enable connection The factory settings require that the connection to CAME Connect be Internet service provider enabled. State the CAME Connect connection must be active to receive calls over the App.
-
Page 13: Automatic Door Opener
Automatic door opener This function, which is especially useful for businesses, lets you automatically open the entrance once the call-but- ton is pressed on the entry panel. The activation of this function can be programmed to schedule time slots and days of the week. -
Page 14: Configuring The User Interface
For editing the selected ele- ment. 08:30 - 12:30 Mon Tue Wed Thu Fri For eliminating the selected 13:30 - 18:30 element. Mon Tue Wed Thu Fri Touch the Back button to return to New time-slot the list of configurable parameters. Clean up 19:02 Thursday... -
Page 15: Maintenance
Touch each of the empty sections and use the drop-down menu to Number of frames: select the content that you want to assign to the section. Empty Empty Save the settings by touching Save. Empty Settings Save 19:02 Thursday 01 Feb 2018 Info Back Home... - Page 16 ID marker. THE DATA PRESENTED IN THIS MANUAL MAY BE CHANGED, AT ANY TIME, AND WITHOUT NOTICE. MEASUREMEN- TS, UNLESS OTHERWISE STATED, ARE IN MILLIMETERS. CAME S.p.A. Via Martiri Della Libertà, 15 31030 Dosson di Casier - Treviso - Italy...