Farfisa PDX2000 Manual

Switchboard
Hide thumbs Also See for PDX2000:

Advertisement

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PDX2000 and is the answer not in the manual?

Questions and answers

Summary of Contents for Farfisa PDX2000

  • Page 1: Table Of Contents

    Chapter 2 SWITCHBOARD Specifications page 2.4 Installation and connections Operation Menu...
  • Page 2 Art. PDX2000 PDX2000 Switchboard for DUO System SAFETY NOTICES Technical Data Read the instructions contained in this manual carefully because they Power supply directly from the line provide important information about safe installation, use and main- Maximum absorption: 0.5A tenance. Keep this manual appropriately for future reference.
  • Page 3 Connection of a CCTV monitor It is also possible to place a CCTV monitor with analogue input near by PDX2000. Attention! Please use a monitor with no earth connection (Class II) or use a ground loop separator. CCTV monitor can work either in continuous or timed mode.
  • Page 4: Switchboard

    - Three operating modes: day, night and direct call Switchboard PDX2000 is a component of the Digital System “DUO” - Communication between internal users or internal users and and comes with a table adaptor and junction box for an easy door stations connection to the installation.
  • Page 5: Installation And Connections

    A1 Positive input for a local call uploading names Ready in progress sorting of names Import in progress Note. When the LO output is used, remove the impe- directory dance group between the LO terminals of the PDX2000 switchboard junction box. Export directory Keypad locked PDX2000...
  • Page 6 In “Device Manager” menu select “Keypad lock” and press ; on the display will appear . To unlock the keypad press for several seconds the button Device Manager 21.09.11 11.06 21.09.11 11.06 Restart - Keypad lock Silent Linea libera Linea libera PDX2000 MT13 - IT 2022...
  • Page 7: Operation

    “hold” or there is communication between two in- on the keypad of the PDX2000. In the case of a directory in which ternal users, the switchboard will ring only with a single tone and aliases are stored, initial selection is not available.
  • Page 8 (which can be extended) following the below procedure: press the button ; door station actually in communication with the switchboard will be put on hold - if the address of the internal user which is displayed is correct press PDX2000 MT13 - IT 2022...
  • Page 9: Menu

    To add other users to the directory repeat the previously described operations. If it is necessary to store two users with the same address (wife and husband; professional office and apartment) it is possible to create two users with different name but with the same address. PDX2000...
  • Page 10 1 to 9) - press - select “Save” - press Ringtone type Call from door station Programming number of ringer tones -Call from door station - Badinerie Call from user Nokia Tune Call from swbd. Mozart 40 PDX2000 PDX2000 MT13 - IT 2022...
  • Page 11 - Save DUO Logs - LED x debug Attention. It advisable to write down the new password and keep - Video always ON it in a safe place; If you lose the password please refer to FARFISA - Master flag ON technical support. Advanced Factory settings To restore the factory settings and reset all the data previous-...
  • Page 12 By memory card it is possible to load in the switchboard memory tions: new software available by contacting the Farfisa technical ser- - set as “Main” those connected to the main line vice.

Table of Contents