Draper FlexStyle Cassette Motorized 485 AC Installation & Operation Instructions
Draper FlexStyle Cassette Motorized 485 AC Installation & Operation Instructions

Draper FlexStyle Cassette Motorized 485 AC Installation & Operation Instructions

Motorized window shade with cassette-style case

Advertisement

Quick Links

RS485 AC & 24V, I/O
FlexStyle
Cassette Motorized 485 AC
®
Motorized window shade with cassette-style case
FSTYL CASS MO

Overview - Components

TOOLS
REQUIRED
PENCIL
Contents
Overview - Components .......................................................................................1
Section 1 - Installing Mounting Brackets ..........................................................3
Section 2 - Wall Mounting Shade........................................................................4
Section 3 - Ceiling Mounting Shade ...................................................................4
Section 4 - Electrical Connections .....................................................................5
(Square Cassette, Elliptical Style Hem Bar shown)
TAPE MEASURE
LEVEL
PLIERS
POWER DRILL
Section 5 - Cable Exit ...........................................................................................5
Section 6 - Limit Switch Adjustments ...............................................................6
Section 7 - Electrical Connections .....................................................................6
Section 8 - WIring Diagrams ...............................................................................7
Section 9 - Cassette Dimensions .......................................................................7
Section 10 - Shade Dimensions ..........................................................................8
© 2024 All Rights Reserved
INSTRUCTIONS
INSTALLATION & OPERATION
CAUTION
Read and understand
all warnings before
beginning installation.
HARDWARE
(by others)
If you have any difficulties installing or servicing your
Motorized FlexStyle Cassette, call your dealer or Draper, Inc.
Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385
draperinc.com | 765.987.7999 | 800.238.7999
|
FORM: FlexStyle_Cassette_MO_485_Inst24

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FlexStyle Cassette Motorized 485 AC and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Draper FlexStyle Cassette Motorized 485 AC

  • Page 1: Table Of Contents

    Section 4 - Electrical Connections ..............5 If you have any difficulties installing or servicing your Motorized FlexStyle Cassette, call your dealer or Draper, Inc. Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385 draperinc.com | 765.987.7999 | 800.238.7999 FORM: FlexStyle_Cassette_MO_485_Inst24...
  • Page 2: Please Read - Important Safety & Installation Information

    Most standard Draper fabrics may be cleaned at the window by vacuuming with a soft brush attachment. They also may be cleaned by using a sponge or soft cloth and mild solution of warm soapy If the shade is telescoping, place a piece of shimming water.
  • Page 3: Section 1 - Installing Mounting Brackets

    FlexStyle Cassette Motorized 485 AC ® page 3 of 8 Section 1 - Installing Mounting Brackets IMPORTANT: Mounting Brackets must be installed parallel, plumb, and square, with a tolerance of +/- 1/ 8 " (3mm) Verify unit measurements and ensure unit will fit in the desired location. Please Note: Installer is responsible for selecting mounting hardware appropriate for site conditions.
  • Page 4: Section 2 - Wall Mounting Shade

    FlexStyle Cassette Motorized 485 AC ® page 4 of 8 Section 2 - Wall Mounting Shade (Curved Cassette with open bottom shown) Please Note: Brackets should be installed no more than 5" in from ends of Cassette Assembly. (127mm) Install any remaining brackets evenly between the outermost brackets. Lift Cassette Assembly into place and align between the Mounting Brackets.
  • Page 5: Section 4 - Electrical Connections

    Caution: All operating switches should be “off” before power is connected. Please Note: For low-voltage wiring requirements, Draper recommends consulting with a professional low-voltage electrical contractor. It is very important that shielded and stranded CAT 5 cable be used to prevent any electrical interference.
  • Page 6: Section 6 - Limit Switch Adjustments

    All operating switches should be “off” before power is connected. Please Note: For low-voltage wiring requirements, Draper recommends consulting with a professional low-voltage electrical contractor. It is very important that shielded and stranded CAT 5 cable be used to prevent any electrical interference.
  • Page 7: Section 8 - Wiring Diagrams

    FlexStyle Cassette Motorized 485 AC ® page 7 of 8 Section 8 - WIring Diagrams Controls & System Overview Data Cable Pin-Out - RJ45 Connector M12 Connector for 3-Wire Motors Sonesse 485 120VAC Motors ® 1 - ORANGE/WHITE 2 - ORANGE 3 - GREEN/WHITE 4 - BLUE Bus Power...
  • Page 8: Section 10 - Shade Dimensions

    FlexStyle Cassette Motorized 485 AC ® MOTORIZED page 8 of 8 Section 10 - Shade Dimensions (25mm) (25mm) Cloth Width = Overall Shade Width - 2 (50mm) Overall Shade Width (Outside of Cassette Unit to Outside of Cassette Unit)

This manual is also suitable for:

Fstyl cass moFlexstyle cassette motorized ac

Table of Contents