Section 2 - Wall Mounting Shade................4 If you have any difficulties installing or servicing your Clutch-Operated FlexStyle Cassette, call your dealer or Draper, Inc. Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385 draperinc.com | 765.987.7999 | 800.238.7999 FORM: FlexStyle_Cassette_CLN_Inst24...
Most standard Draper fabrics may be cleaned at the window by vacuuming with a soft brush If the shade is telescoping, place a piece of shimming attachment. They also may be cleaned by using a sponge or soft cloth and mild solution of warm soapy fabric into the fabric roll when the shade is deployed water.
FlexStyle Cassette Clutch ® page 3 of 6 Section 1 - Installing Mounting Brackets IMPORTANT: Mounting Brackets must be installed parallel, plumb, and square, with a tolerance of +/- 1/ 8 " (3mm) Verify unit measurements and ensure unit will fit in the desired location. Please Note: Installer is responsible for selecting mounting hardware appropriate for site conditions.
FlexStyle Cassette Clutch ® page 4 of 6 Section 2 - Wall Mounting Shade (Curved Cassette with open bottom shown) Please Note: Brackets should be installed no more than 5" in from ends of Cassette Assembly. (127mm) Install any remaining brackets evenly between the outermost brackets. Lift Cassette Assembly into place and align between the Mounting Brackets.
FlexStyle Cassette Clutch ® page 5 of 6 Section 4 - Tensioned Hold Down (Must be installed to make shade fully operable.) Please Note: Screws provided are not suitable for all mounting surfaces. The installer is responsible for secure mounting using appropriate hardware for the site conditions.
Need help?
Do you have a question about the FlexStyle Cassette Clutch and is the answer not in the manual?
Questions and answers