Remove Wheels And; Dropper Post Lever - Intense SNIPER XC PRO Manual

A
B
10
C
S T E P 1
REMOVE WHEELS
& PUT BIKE IN STAND
When you first open your bike box you will find an
accessory/tool box and the bike itself. Carefully locate
the tool box and remove the wheels from the bike box
(A) and put to one side.
While the bike is still in the box, take off the packaging
around the handlebars and expose the dropper post
lever on the left-hand side of the handlebar. Push
dropper post lever (B). This will raise the dropper post
to its highest position, which will allow you to put the
bike safely in a bike stand. Pull the bike out and place
in bike stand. Only use the seatpost to clamp the bike
to the stand (C).
11