Advertisement
Quick Links
ASSEMBLY INSTRUCTIONS FOR 10B103 GROUND ANCHOR ASSEMBLY
Ground Anchor Assembly (4)
(Part# 10B103 Pack of 4)
1/2"-13 X 4" Hex Bolt
1/2" Washer
Cap
Ground Anchor
***CAUTION***
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Movable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
140 Pacific Drive Quakertown, PA 18951
800-531-4252 Kwikgoal.com
©
2016, Rev 2021 Kwik Goal Ltd.
NZ414 Rev. 11/19/21
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for KwikGoal 10B103
Summary of Contents for KwikGoal 10B103
- Page 1 ASSEMBLY INSTRUCTIONS FOR 10B103 GROUND ANCHOR ASSEMBLY Ground Anchor Assembly (4) (Part# 10B103 Pack of 4) 1/2"-13 X 4" Hex Bolt 1/2" Washer Ground Anchor ***CAUTION*** This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES and shall be secured against overturning.
- Page 2 If this is not practical, store movable soccer goals in a place where children cannot have access to them. 10. Fully disassemble goals for seasonal storage. 140 Pacific Drive Quakertown, PA 18951 800-531-4252 Kwikgoal.com © 2019 Kwik Goal Ltd. NZ414 Rev. 11/19/21...
- Page 3 1. Set goal in desired area and mark ground anchor hole locations. 2. Move goal and dig holes a minimum of 24" in diameter and 20" deep. Areas subject to heavy ground frost may go as deep as 36". 3. Apply anti-seize compound to ground anchor bolts prior to insertion. Attach ground anchors to assembled goal and secure with coated bolts.
- Page 4 6. After installing, test as described below to verify effectiveness of anchor system. If applicable, allow concrete to fully cure before testing. ANCHOR TEST 1. Clear all persons from a minimum 50 foot radius surrounding the goal. 2. Verify goal is attached to anchors according to instruction. 3.
- Page 5 12" Dia. and 20" Deep. 1/2" x 4" Hex Bolt Concrete Detail 60 Approx. 1/2" Flat Washer Bench Frame 12 3/4” 20” Minimum Ground Anchor Concrete Stone Stone 12” Minimum Go to kwikgoal.com for additional product information. NZ414 Rev. 11/19/21...
Need help?
Do you have a question about the 10B103 and is the answer not in the manual?
Questions and answers