Advertisement
Quick Links
ASSEMBLY INSTRUCTIONS FOR 10B8103 PORTABLE ONLY SHELTER BOX ANCHOR
1. Unpack all parts and check for damage that may have occurred during shipping. If damage has occurred,
notify Kwik Goal immediately. Lay out all parts. Remove all cardboard and packaging immediately. Wet or
damp packaging may damage contents.
2. Read through entire instruction before beginning assembly and installation.
NOTE: Components may be packaged in one or more additional boxes.
Parts
Box Anchor (4)
(Part# UZ1669)
Hardware
Note: Hardware may be packaged separately
in one or more boxes. Open all packages
before beginning assembly.
7/16" Flat Washer
7/16" X 5" Hex Bolt
7/16" Lock Nut
(Part# TZ47)
1/2" Flat Washer
(Part# TZ297)
Assembly Tools
Ground Anchor (4)
(Part# 10B103 Pack of 4)
(Part# TZ171)
(Part# TZ307)
5/8", 3/4"
Wrench
140 Pacific Drive Quakertown, PA 18951
(P) 215-536-2200 / (P) 800-531-4252 / (F) 215-536-4309 / (F) 800-778-8869
Visit our website @ kwikgoal.com
1/4" x 12 1/2" Chain (4)
Snap Link (4)
(Part# VZ737)
(8)
(4)
(4)
(8)
Ratchet with
5/8", 3/4" Socket
©
2019 Kwik Goal Ltd.
(Part# VZ564-12)
1/2" x 1/2" Spacer (4)
Socket Extension
1/4" x 3 1/2" Chain (4)
(Part# VZ564-3)
(Part# TZ420)
NZ452 Rev. 08/20/19
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for KwikGoal 10B8103
Summary of Contents for KwikGoal 10B8103
- Page 1 ASSEMBLY INSTRUCTIONS FOR 10B8103 PORTABLE ONLY SHELTER BOX ANCHOR 1. Unpack all parts and check for damage that may have occurred during shipping. If damage has occurred, notify Kwik Goal immediately. Lay out all parts. Remove all cardboard and packaging immediately. Wet or damp packaging may damage contents.
- Page 2 WITHIN 120 NEVER LEAVE SHELTERS UNATTENDED AND UNSECURED 140 Pacific Drive Quakertown, PA 18951 (P) 215-536-2200 / (P) 800-531-4252 / (F) 215-536-4309 / (F) 800-778-8869 Visit our website @ kwikgoal.com 2015, Rev. 2019 Kwik Goal Ltd. NZ452 Rev. 08/20/19...
- Page 3 3. Attach anchor chain to shelter frame, 2 in the Assembled Shelter Frame 7/16” Lock Nut front on the outside and 2 on the inside at the 7/16” Flat Washer back as shown. 7/16” Flat Washer 7/16” X 5” Hex Bolt 1/4”...
- Page 4 1/2” Hex Bolt 4. Attach anchor chain to anchor box as shown. Use 1/2” flat washers supplied in hardware pack. 1/2” Flat Washer Use caution when tightening bolt to make sure 1/4” X 12-1/2” Chain the anchor chain does not bind. Stow chain in anchor box until concrete is cured.
- Page 5 TWO ROW TOP VIEW 24 in Anchor Hole 4 Places 1'-0" 5’-10” Overall Shelter Width + 8” = Center to center of anchors 0'-9” From front of Shelter Anchor Hole Detail (4 places per shelter) Anchor Box 3" Field 60°...
- Page 6 Anchor Box Snap Link Go to kwikgoal.com for additional product information. THIS EQUIPMENT MUST BE STORED IN A SECURED, SHELTERED AREA WHEN NOT IN USE OR IN THE THREAT OF HIGH WINDS. ANY WEATHER DAMAGE TO THIS EQUIPMENT WILL NOT BE COVERED UNDER KWIK GOAL’S PRODUCT GUARANTEE.
Need help?
Do you have a question about the 10B8103 and is the answer not in the manual?
Questions and answers