Page 1
ASSEMBLY INSTRUCTIONS FOR 10B4606 ANCHOR WEIGHT FOR PORTABLE ONLY SHELTERS 1. Unpack all parts and check for damage that may have occurred during shipping. If damage has occurred, notify Kwik Goal immediately. Lay out all parts. Remove all cardboard and packaging immediately. Wet or damp packaging may damage contents.
Page 3
3. Assemble anchor weights as shown below. Note: Do not overtighten hardware. 7/16” X 5-1/4” Hex Bolt 7/16” Large Flat Washer 7/16” Flat Washer 7/16” Lock Nut Anchor Weight Polycarbonate removed for clarification. 7/16” Lock Nut 7/16” Large Flat Washer 7/16”...
Page 4
FRONT WHEEL ANCHOR WEIGHTS ASSEMBLED REAR WHEEL ANCHOR WEIGHT ASSEMBLED Go to Kwikgoal.com for additional product information. THIS EQUIPMENT MUST BE STORED IN A SECURED, SHELTERED AREA WHEN NOT IN USE WARNING OR IN THE THREAT OF HIGH WINDS. ANY WEATHER DAMAGE TO THIS EQUIPMENT WILL NOT BE COVERED UNDER KWIK GOAL’S PRODUCT GUARANTEE.
Need help?
Do you have a question about the 10B4606 and is the answer not in the manual?
Questions and answers