Download Print this page

KwikGoal 2B3003 Assembly Instructions Manual

Deluxe european club goal

Advertisement

Quick Links

ASSEMBLY INSTRUCTIONS FOR 2B3003 DELUXE EUROPEAN CLUB GOAL
1. Unpack all parts and check for damage that may have occurred during shipping. If damage has occurred,
notify trucking company immediately. Lay out all parts. Remove all cardboard and packaging immediately.
Wet or damp packaging may damage contents.
2. Read through entire instruction before beginning assembly and installation.
NOTE: Components may be packaged in one or more additional boxes.
Left Post (1)
(Part# UZ1486)
This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES
and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings
must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use
must be disassembled and properly stored in a safe, secure area (See included Guidelines for Moveable Soccer Goal
Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use
this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.
All warning and safety labels included with this product must be visible at all times.
Any modifications to this or any Kwik Goal product will void any and all warranties.
(P) 215-536-2200 / (P) 800-531-4252 / (F) 215-536-4309 / (F) 800-778-8869
Base (2)
(Part# UZ753)
69-3/4"
66-3/4"
ID STICKER
140 Pacific Drive Quakertown, PA 18951
Visit our website @ kwikgoal.com
2005, Rev 2017 Kwik Goal Ltd.
Crossbar (2)
(Part# UZ1081)
135-3/4"
Post Corner (2)
(Part# UZ811)
***CAUTION***
Crossbar Corner (4)
(Part# UZ810)
Right Post (1)
(Part# UZ1489)
66-3/4"
NZ300 Rev. 07/17/17

Advertisement

loading

Summary of Contents for KwikGoal 2B3003

  • Page 1 ASSEMBLY INSTRUCTIONS FOR 2B3003 DELUXE EUROPEAN CLUB GOAL 1. Unpack all parts and check for damage that may have occurred during shipping. If damage has occurred, notify trucking company immediately. Lay out all parts. Remove all cardboard and packaging immediately.
  • Page 2 10. Fully disassemble goals for seasonal storage. 140 Pacific Drive Quakertown, PA 18951 (P) 215-536-2200 / (P) 800-531-4252 / (F) 215-536-4309 / (F) 800-778-8869 Visit our website @ kwikgoal.com 1998 rev 2009 Kwik Goal Ltd. NZ300 Rev. 07/17/17...
  • Page 3: Ground Anchor

    Net Strap (1) Channel Spacer (12) Backstay Brace (2) Post Braces (2) (Part# VZ328P2) (Part# 10B4403 Pk of 2) (Part# UZ812) (Part# UZ737) Net Clip (80) Backstay (2) Ground Anchor (4) Net (1) (Part# 10B3101 Pack of 100) (Part# VZ329P1) (Part# 10B103 Pack of 4) (Part# 3B6823) Assembly Tools...
  • Page 4 3/8” Lock Washer Post Corner 3/8” Flat Washer Left Post Square Nut Channel Spacer Square Nut Crossbar Corner Warning sticker KWIKGOAL sticker Left Post Post Corner Post Brace Crossbar Corner 3/8” X 1 3/4” Hex Bolt 3/8” Lock Washer 3/8” Flat Washer...
  • Page 5 3/8” Flat Washer Right Post Crossbar Square Nut Channel Spacer Right Post Base Warning sticker KWIKGOAL sticker Crossbar Corner 3/8” X 1 3/4” Hex Bolt Crossbar Corner 3/8” Lock Washer Crossbar 3/8” Flat Washer Crossbar 3/8” X 1 3/4” Hex Bolt 3/8”...
  • Page 6 NOTE: If installing optional wheels (Part# 10B410), insert threaded channel spacers from wheel option package in each base. To prevent threaded channel spacers from falling out during assembly, temporarily insert a 3/8” hex bolt into the last threaded channel spacer and finger tighten. Lift assembled bases and insert into assembled posts.
  • Page 7 Remove 3/8” hex bolts used to temporarily secure channel spacers in bases. Attach backstays and backstay braces to square nuts as shown. 5/16” Lock Nut 3/8” X 1 3/4” 5/16” X 1 1/2” Eyebolt 5/16” Flat Washer Hex Bolt 3/8” Lock Nut 3/8”...
  • Page 8 7. Set goal onto bases in desired location and mark anchor hole locations. Move goal and dig holes a minimum of 24” in diameter and 20” deep. (NOTE: Areas subject to heavy ground frost may go as deep as 36”.) Attach ground anchors to assembled goal.
  • Page 9 8. Counterbalance weight may be used as a temporary anchoring system. A minimum of 240 lbs. must be placed on the back bottom bar for the goal to be stabilized. Test anchoring in accordance with step 9. - Distribute total amount of weight evenly between each back corner.
  • Page 10 9. After installing, test as described below to verify effectiveness of anchor system. If applicable, allow concrete to fully cure before testing. ANCHOR TEST 1. Clear all persons from a minimum 50 foot radius surrounding the goal. 2. Verify goal is attached to anchors according to instruction. 3.
  • Page 11 10. Attach net strap to the eyebolts in the backstays as shown. Pull net strap tight as shown. (NOTE: Do not over tighten net strap. Over tightening may damage goal.) Excess strap can be trimmed to length. Leave 12” to 18”...
  • Page 12 CAUTION: DO NOT ATTEMPT TO CLIMB ON GOAL WHILE ATTACHING NET. Net Clip Net Clip Go to kwikgoal.com for additional product information. ***CAUTION*** This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES and shall be secured against overturning.