Summary of Contents for ElectrIQ eiQ-30CVWF200VAFSGH
Page 1
USER MANUAL 30” CURVED LED MONITOR eiQ-30CVWF200VAFSGH Thank you for choosing electriQ Please read the user manual before using this monitor and keep it safe for future reference Visit www.electriQ.co.uk to view our entire range of Intelligent Electricals...
CONTENTS Safety Information What’s Included Monitor Dimensions Connections Available on the Monitor Wall Mounting Shortcut Key Guide Initial Setup Menu Options Input Source Brightness/Contrast Color Settings Picture Quality Settings Display Settings Audio Settings Multi-Window OSD Setting Other Settings Specification Troubleshooting...
SAFETY INFORMATION Read these instructions – All the safety and operating instructions should be read ⚫ before this product is installed or operated. Keep these instructions – The safety and operating instructions should be retained ⚫ for future reference. Heed all warnings – All warnings on the appliance and in the operating instructions ⚫...
Page 5
WARNINGS Never place a monitor in an unstable location. A monitor may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: Use cabinets or stands recommended by the manufacturer of the monitor. ⚫...
CONNECTIONS AVAILABLE ON THE MONITOR POWER USB (Firmware updates) HDMI 2 (HDMI 1.4, 60Hz, Free Sync) HDMI 1 (HDMI 2.0, 200Hz, Free Sync) DP (Display Port 1.2, 200Hz, Free Sync) AUDIO OUT WALL MOUNTING • The monitor is provided with mounting holes for a VESA approved wall mounting bracket (not supplied). •...
SHORTCUT BUTTONS The monitor includes one touch options to access common settings. Display the signal source menu. Use the ◄and► buttons to navigate and the M button to select the source. Activate the Line of Sight feature. Press again to cycle between the colours or turn off.
OSD MENU INPUT SOURCE Switch the signal input or select the source. DP, HDMI1, HDMI2 Signal BRIGHTNESS/CONTRAST Brightness Adjust the brightness of the display between 0 and 100. Contrast Adjust the contrast of the display between 0 and 100. Turn the Dynamic Contrast Ratio Feature On or Off.
COLOR SETTINGS Change the Gamma value for the display between 2.0/ 2.2/ 2.4. Gamma Change the picture mode between Standard, Photo, Movie, Game, FPS and Picture Mode Change the Colour Temperature of the display to Normal, Warm, Cool or Colour User.
DISPLAY Aspect Ratio Change the image aspect ratio to Wide Screen. 4:3 Auto. 1:1 AUDIO Mute Turn On and off to mute and unmute the audio output. Volume Adjust the output volume between 0 and 100. Audio Source Chose which source the audio is output from.
MULTI-WINDOW Multi- Choose the different formats of multi window display between Off, Picture in Picture (PIP) and Window Picture by Picture (PBP 2Win) Choose the source of the second window between HDMI 1 and HDMI 2. Win2 Input Adjust the size of the secondary source in PIP and PBP modes between Small, Medium and PIP Size Large Set the position of the secondary source in PIP and PBP modes between Top Right, Top Left,...
OTHER Free Sync Mode Turn Free Sync On or Off. HDR: Turn HDR On (requires HDMI 2.0 input). Turn HDR On or Off. MPRT Turn MPRT on and off Reset Restore factory default setting. Firmware Update Update the monitor firmware with proper firmware Using the USB port.
SPECIFICATION eiQ-30CVWF200VAFSGH 29.5” (21:9) LED Backlit Monitor Panel Type Panel Dimensions 749.3mm Diagonal Plastic Case Type 2560(H)x1080(V)@200Hz Best Resolution Active Display Area 690.432(H)x291.276(V) Pixel Pitch 0.2697(H)x0.2697(V) Contrast Ratio 3000:1 Typical Brightness 350 cd/m² 1ms (MRPT) Response Time 176°/170° CR≥10 Viewing Angle Display Colours 16.7M...
Please contact the local council for details of your local household waste recycling centres electriQ UK SUPPORT www.electriQ.co.uk/support If the unit fails to operate call: 0330 390 3061 or complete the online form Office hours: 9AM - 5PM Monday to Friday www.electriQ.co.uk...
Need help?
Do you have a question about the eiQ-30CVWF200VAFSGH and is the answer not in the manual?
Questions and answers