Advertisement
Quick Links
After removing the parts from packaging, inspect them to ensure
that no damage has occurred. Please report any damage
immediately to your authorized Archgard dealer.
Please review and understand the information in this manual in
full PRIOR to beginning your installation.
INSTALLER:
LEAVE THIS MANUAL WITH THE APPLIANCE.
CONSUMER:
RETAIN THIS MANUAL FOR FUTURE REFERENCE
ARCHGARD FIREPLACE PRODUCTS
7116 Beatty Drive
Mission, BC V2V 6B4 Canada
IMPORTANT
INSTALLATION MANUAL
For installation in 31-DVIE33LN-3
(see the Installation, Operation, and
Maintenance Manual included with the fireplace)
31-LS-GT
31-LS-WW
31-LS-SB
WARNING: If the information in this manual is not followed
exactly, a fire or explosion may result causing property
damage, personal injury or loss of life.
Do not store or use gasoline or other flammable vapors or
liquids in the vicinity of this or any other appliance.
WHAT TO DO IF YOU SMELL GAS:
•
Do not try to light any appliance
•
Do not touch any electrical switch; do not use any phone in
your building
•
Immediately call your gas supplier from a neighbors phone.
•
Follow the gas suppliers instructions
•
If you can not reach your gas supplier, call the fire
department
Installation and service must be performed by a qualified
installer, service agency or the gas supplier.
Only kits supplied by the manufacturer may be used.
English and French Installation Manuals available through
your local dealer or visit our website at:
www.archgard.com
Les manuels d'installation en anglais et en français son
.
disponibles chez votre détaillant local ou en visitant notre
site web: www.archgard.com
Log Sets
MODELS:
Grand Timber
Weathered Wood
Silver Birch
200-0400-02
March 19, 2024
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Archgard 31-LS-GT
Summary of Contents for Archgard 31-LS-GT
- Page 1 After removing the parts from packaging, inspect them to ensure that no damage has occurred. Please report any damage • Do not try to light any appliance immediately to your authorized Archgard dealer. • Do not touch any electrical switch; do not use any phone in your building •...
-
Page 2: Locator Pins
Overview The Archgard pan burner bed and fiber logs are designed to give a realistic fire package, and created to look the same as the day they were originally installed even after many years of use. Care must be given when first installing the logs, and if removed for servicing, as they can be damaged or broken if not handled properly. - Page 3 Installation Grand Timber Log Set (31-DVIE33LN-3) There are slight differences between the Grand Timber and SIlver Birch Log Sets and the Weathered Wood Log Set. The following instructions show the installation of the Grand Timber Log Set, however the installation of Silver Birch is identical. Installation of the Weathered Wood Log Set may be found on Page 08.
- Page 4 Installation Step 3: Place Log 03 along the left side of the firebox, using the Step 4: Spread some embers along the back side of the burner. pin on the left side of the burner for alignment. Do not place embers with a flat edge down as it may block burner ports.
- Page 5 Installation Step 7: Note the cut-out in Log 04 and Log 03. These are used Step 6: Place Log 05 on the pin to the right of Log 04. for the placement of Log 06. Note: This pin is NOT used with the Grand Timber log set.
- Page 6 Log 06 Log 07 Log 04 Log 03 Log 05 Figure 19: Part # Item Description Part # Item Description 31-LS-GT Log Set 1 Set 31-LS-GT-5 Log 5 (Middle Right) 31-LS-GT-1 Log 1 (Left Rear) 31-LS-GT-6 Log 6 (Upper Left) 31-LS-GT-2...
- Page 7 Installation Log 02 Log 01 Log 06 Log 07 Log 04 Log 03 Log 05 Figure 20: Part # Item Description Part # Item Description 31-LS-SB Log Set 1 Set 31-LS-SB-5 Log 5 (Middle Right) 31-LS-SB-1 Log 1 (Left Rear) 31-LS-SB-6 Log 6 (Upper Left) 31-LS-SB-2...
- Page 8 Installation Weathered Wood Log Set (31-DVIE33LN-3) Log 02 Log 01 Log 03 Log 04 Log 07 Log 06 Log 05 Figure 20: Step 1: Place Log 01 on the pin the left, rear corner of the Step 2: Place Log 02 on other two pins in the back of the firebox. firebox.
- Page 9 Installation Step 3: Place Log 03 along the left side of the firebox, using the Step 4: Spread some embers along the back side of the burner. pin on the left side of the burner for alignment. Do not place embers with a flat edge down as it may block burner ports.
- Page 10 Installation Step 5: Place Log 04 on the two pins to the right of Log 03. Step 6: Place Log 05 on the pins to the right and front of Log 04. Figure 28: Figure 29: Step 7: Note the flat section in Log 04 and Log 03. These are Step 8: Place Log 06 on top of Log 04 and Log 03.
- Page 11 Installation Platinum Ember Placement Step 1: Remove embers from the bag. Be sure to follow handling Step 2: Place the embers randomly throughout the fire bed, instructions on the bag. Separate embers by pulling apart. taking care to avoid burner openings. Embers may be flattened or separated into smaller pieces to achieve any desired look.
- Page 12 ARCHGARD INDUSTRIES LTD. 7116 BEATTY DRIVE MISSION, B.C. V2V 6B4 CANADA WEBSITE: WWW.ARCHGARD.COM...
Need help?
Do you have a question about the 31-LS-GT and is the answer not in the manual?
Questions and answers