Advertisement
Quick Links
MODELS:
31-LS-GT
31-LS-WW
After removing the parts from packaging, inspect them to ensure
that no damage has occurred. Please report any damage
immediately to your authorized Archgard dealer.
Please review and understand the information in this manual in
full PRIOR to beginning your installation.
INSTALLER:
LEAVE THIS MANUAL WITH THE APPLIANCE.
CONSUMER:
RETAIN THIS MANUAL FOR FUTURE REFERENCE
ARCHGARD FIREPLACE PRODUCTS
7116 Beatty Drive
Mission, BC V2V 6B4 Canada
Grand Timber
Weathered Wood
IMPORTANT
INSTALLATION MANUAL
For installation in 345-DVTE31LN-1
(see the Installation, Operation, and
Maintenance Manual included with the fireplace)
WARNING: If the information in this manual is not followed
exactly, a fire or explosion may result causing property
damage, personal injury or loss of life.
Do not store or use gasoline or other flammable vapors or
liquids in the vicinity of this or any other appliance.
WHAT TO DO IF YOU SMELL GAS:
•
Do not try to light any appliance
•
Do not touch any electrical switch; do not use any phone in
your building
•
Immediately call your gas supplier from a neighbors phone.
•
Follow the gas suppliers instructions
If you can not reach your gas supplier, call the fire
•
department
Installation and service must be performed by a ualified
installer, service agency or the gas supplier.
Only kits supplied by the manufacturer may be used.
English and French Installation Manuals available through
your local dealer or visit our website at:
www.archgard.com
Les manuels d'installation en anglais et en français son
.
disponibles chez votre détaillant local ou en visitant notre
site web: www.archgard.com
Log Sets
200-3346-01
August 7, 2020
Advertisement
Related Manuals for Archgard 31-LS-GT
Summary of Contents for Archgard 31-LS-GT
- Page 1 After removing the parts from packaging, inspect them to ensure that no damage has occurred. Please report any damage WHAT TO DO IF YOU SMELL GAS: immediately to your authorized Archgard dealer. • Do not try to light any appliance •...
- Page 2 Overview The Archgard pan burner bed and fiber logs are designed to give a realistic fire package, and created to look the same as the day they were originally installed even after many years of use. Care must be given when first installing the logs, and if removed for servicing, as they can be damaged or broken if not handled properly.
- Page 3 Installation Grand Timber Log Set (345-DVTE31LN-1) Log 07 Log 05 Log 04 Log 02 Log 01 Log 06 Log 03 Figure 02: Step 1: Place Log 01 on the pin the left, rear corner of the firebox. Figure 03: Figure 04:...
- Page 4 Installation Step 2: Place Log 02 on other two pins in the back of the firebox. Figure 05: Figure 06: Step 3: Install the log bracket in the holes on the left side of the burner using the two (2) black tek screws included in the manual bag. Figure 07: Figure 08: Step 4: Spread some embers along the back side of the burner.
-
Page 5: Log
Installation Step 5: Place Log 04 toward the left side of the firebox, using the two pins for alignment. Figure 11: Figure 12: Step 6: Place Log 05 on the pin to the right of Log 03. After it's placed, rotate the log until it contacts the pin on the right side of the burner. - Page 6 Installation The port with screen mesh may be covered with embers - ensure the entire port is not blocked. Figure 17: Step 8: Place the end of Log 07 on the pin at the front of the burner. The top of Log 05 will rest on Log 02 and Log 04. Figure 18: Figure 19: Step 9: Add embers around the bottom of Log 07.
-
Page 7: Log
Installation Step 10: Log 06 rests on Log 01 and Log 03. Log 06 in place. Figure 21: Figure 22: Step 11: Log 03 rests on Log 02 and Log 04. Log 03 in place. Figure 23: Figure 24: Platinum Ember Placement Step 1: Remove embers from the bag. - Page 8 Log 01 Log 03 Log 06 Log 07 Log 04 Log 05 Figure 27: Part # Item Description Part # Item Description 31-LS-GT Log Set 1 Set 31-LS-GT-5 Log 5 31-LS-GT-1 Log 1 31-LS-GT-7 Log 7 31-LS-GT-2 Log 2 31-LS-GT-6...
- Page 9 Installation Weathered Wood Log Set (345-DVTE31LN-1) Log 02 Log 01 Log 03 Log 04 Log 07 Log 06 Log 05 Figure 28: Step 1: Place Log 01 on the pin the left, rear corner of the firebox. Figure 29: Figure 30:...
- Page 10 Installation Step 2: Place Log 02 on other two pins in the back of the firebox. Figure 31: Figure 32: Step 3: Install the log bracket in the holes on the left side of the burner using the two (2) black tek screws included in the manual bag. Figure 33: Figure 34: Step 4: Spread some embers along the back side of the burner.
- Page 11 Installation Step 5: Place Log 04 on the two pins on the left side of the burner. Figure 37: Figure 38: Step 7: Log 05 will have multiple holes on the bottom. Use the Step 8: Place Log 05 on the right side of the burner. hole highlighted in Figure 39.
- Page 12 Installation Step 10: Place some embers along the front of the burner. Do not The port with screen mesh may be covered with embers - place embers with a flat edge down as it may block burner ports. ensure the entire port is not blocked. Figure 43: Figure 44: Step 11: Place the end of Log 07 on the pin at the front of the burner.
- Page 13 Installation Step 13: Log 06 rests on Log 01 and Log 04. Log 06 in place. Figure 48: Figure 49: Step 14: Log 03 rests on Log 02 and the right side of the burner. Log 03 in place. Figure 50: Figure 51: Platinum Ember Placement Step 1: Remove embers from the bag.
- Page 14 Installation Weathered Wood Logset Overview Log 02 Log 01 Log 06 Log 03 Log 07 Log 04 Log 05 Figure 54: Part # Item Description Part # Item Description 31-LS-WW 31-LS-WW-5 Log Set 1 Set Log 5 31-LS-WW-1 31-LS-WW-6 Log 1 Log 6 31-LS-WW-2 Log 2...
- Page 15 NOTES...
- Page 16 ARCHGARD INDUSTRIES LTD. 7116 BEATTY DRIVE MISSION, B.C. V2V 6B4 CANADA WEBSITE: WWW.ARCHGARD.COM...