Omron WS02-CXPC1-V8 - V8.1 REV 02-2009 Operation Manual page 31

Sfc programming
Table of Contents

Advertisement

Window Components
Connections
Open Subchart Definition
Cut
Copy
Paste
Delete
Tidy Descendant SFC Elements
Online Pop-Up Menu
Force Step
Set Step Timer Value
Open Subchart Definition
Show Action Blocks
Tidy Descendant SFC Elements
Right-Clicking a Transition
The transition elements menu for working online differs from that for working offline.
Offline Pop-Up Menu
Edit Transition Condition
Add Step and Transition
Add Step
Insert Transition and Step Above
Add Connection
Add Jump to Step
Add Connection To Step
Delete Connection To Step
Draw Connections to Step
as Jump
Add Connection From Step
Delete Connection From
Step
Menu
On
Off
Cancel
Menu
Opens the Add Connection dialog.
Draws out a connection from the
topside of the selected step, and
connects it to the downside of the
transition that is to become the jump
starting point.
Draws out a connection from the
topside of the selected step, and
connects it to the downside of a
transition.
Deletes the connection on the topside
of the selected step.
Changes the topside of the selected
step to a jump.
Draws out a connection from the
downside of the selected step, and
connects it to the topside of a transition.
Deletes the connection on the
downside of the selected step.
Opens a subchart.
Cuts the selected step to the clipboard.
Copies the selected step to the
clipboard.
Pastes the contents of the clipboard.
Deletes the selected step.
Arranges elements of the SFC chart
positioned after the selected step.
Sub-Menu
Activates the selected step.
Deactivates the selected step.
Cancels the forced status.
Updates the step timer value.
Opens a subchart.
Shows hidden action blocks.
Arranges elements of the SFC chart
positioned after the selected step.
Sub-Menu
Enables editing of the selected
transition condition.
Adds a step and a transition, and
connects them to the selected
transition.
Adds a step and connects it to the
selected transition.
Adds a transition and a step, and
connects them to the topside of the
selected transition.
Section 1-3
Function
Function
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sysmac ws02-cxpc1-v8Sysmac cx-programmer 8.1

Table of Contents